Loading ...
Loading ...
Loading ...
IV. Mounting the Hopper to the Chamber
1. Remove the 4 Gaskets and 4 Bolts from the side of the Hopper.(see diagram "Remove from hopper")
2. Open the lid on the Grill Chamber Assembly (1) and insert the Hopper into the square hole in the Cham-
ber.
3. Reattach the 4 Gasket and Bolts that were removed from the Hopper. (Tighten
the Bolts by using the Wrench.)
4. Locate the RTD Male Plug-In-Connector coming from the Grill Chamber
Assembly (1). It will look like a loose wire with a connector on the end.
5. Locate Connect the RTD Female Plug-In-Connector coming from the Hopper
\Assembly (3).
6. Connect the two RTD Plug-In-Connectors together.
Note: Any extra loose wire can be tucked into the gap between the Grill Chamber Assembly and the
Hopper.
Remove From
Hopper
10
Loading ...
Loading ...
Loading ...