Loading ...
Loading ...
Loading ...
9
III. Assembling Of Hopper
1. Insert Hopper Assembly II (61) into Hopper Assembly I (3)so the bolt holes are aligned.
2. Insert the Bolts (58) through the holes in the Hopper
3. Open the Hopper Lid and attach the Hexagon Kep Nuts (59) on the inside of the Hopper
Assembly II (61), then tighten it from inside.
4. Insert the S/S Bolt (54) through Gasket (53), then the Hopper lid (19), and into the Hopper Handle
(20). Use Screwdriver to tighten.
58
53 54
Loading ...
Loading ...
Loading ...