D-Link M15-2, M15-3 User Manual

Loading ...

60D-Link M15 User Manual

Section 3 - Conguration

IPv4/IPv6 Rules

To begin, use the drop-down menu to select whether it is an ALLOW or DENY

rule. You can also choose to turn ltering OFF.

If you want to remove a rule, click

in the Delete column. If you wish to edit

a rule, click

in the Edit column. If you wish to create a new rule, click the

Add Rule button.

Go to Features > Firewall, then click the IPv4 Rules tab or the IPv6 Rules tab

to congure rules for trac ltering.

To congure the Firewall Advanced settings, click the Advanced link. Refer

to Firewall on page 58.

If you click

Edit or Add Rule, the following options will appear:

Name Enter a name for the rule.

Source IP

Address Range

Enter the source IP address range (e.g. 1.1.1.1-1.1.1.2 for IPv4 or

2001::1-2001::2 for IPv6) that the rule will apply to. Using the drop-

down menu, specify whether it is a WAN or LAN IP address. Both a

single IP address and a range of IP addresses can be entered.

Destination IP

Address Range

Enter the destination IP address range (e.g. 1.1.1.1-1.1.1.2 for IPv4 or

2001::1-2001::2 for IPv6) that the rule will apply to. Using the drop-

down menu, specify whether it is a WAN or LAN IP address. Both a

single IP address and a range of IP addresses can be entered.

Protocol & Port

Range

Select the protocol of the traffic to allow or deny (Any, TCP, or UDP)

and then enter the range of ports (e.g. 21-23) that the rule will apply

to. Select Any to allow/deny all types of traffic regardless of the port

number.

Loading ...

D-Link M15-2, M15-3 EAGLE PRO AI AX1500 Mesh System