Loading ...
Loading ...
Loading ...
17
Weight ( Without guide bar and chain, empty tank):5,6 kg
Sound pressure level(L
PA
): 102,89 dB(A), K=2,5 dB(A)
Sound power lever(L
WA
): 111,68 dB(A), K=2,5 dB(A)
Vibration:
Max. front handle: 7.256 m/s
2
, K=1.5 m/s
2
Max. rear handle 8.497 m/s
2
, K=1.5 m/s
2
Length max. Bar: 450mm (18'')
Chain pitch: 8,255 mm
Template chain: 1,47 mm
Sprocket: 7 Teeth X 8,255 mm
Engine idling speed: 3050 min
-1
Maximum speed: 11000 min
-1
Chain Type: 21LPX072X
Guide Bar Type: 188PXBK095
The operating noise level may exceed 115 dB.
Repairs
Use only the accessory and spare parts recommended by
the manufacturer. If the machine suers a failure despite
our quality controls and your care, have repair work
carried out only by a trained electrician.
Environmental protection
Do not simply dispose of the machine,
accessories and packaging in the dustbin, but
ensure that it can be recycled. A small
amount of effort on your part can do a great
deal of good for our environment.
Residual risks
Even when properly used in the tool is always some
residual risk that can not be excluded. From the nature
and design of the tool, the following potential hazards
can be derived :
- Contact with the unprotected chain ( cuts);
- Reaching into the running saw chain (cut injury);
- Unexpected , sudden movement of the guide rail ( cuts);
- Ejection of parts of the chain;
- Ejection of parts of the material to be cut;
- Impairment of hearing , if there is no prescribed hearing
protection is worn;
- Inhalation of of material to be cut;
- Risk of kickback;
- This device produces an electromagnetic field during
- Wait until the engine is completely cold.
- Remove the air filter cover.
- Take the spark plug cap off the spark
plug and unscrew the spark plug using a spark
plug wrench.
- If the electrode has suered excessive wear or
it is heavily encrusted, the spark plug must be
replaced with an equivalent one. Heavy encrustation on
the spark plug may be caused by too high an oil content
in the fuel mixture, poor oil quality, the petrol mixture
being too old or the air filter being blocked.
- Screw the spark plug fully into the thread by
hand (do not cross the thread).
- Now tighten the spark plug using a spark plug
wrench.
- If you use a torque wrench, the tightening
torque is 12-15 Nm.
- Now attach the spark plug cap correctly to the
spark plug.
Fit the air filter cover again.
Chain lubrication
the fuel can be checked through the sight glass on the
fuel tank.
Important: please fill up the oil tank before refueling the
fuel tank every time.
Technical data
Air-cooled 2-stroke engine SPS1E46F
Displacement: 51,5 cm
3
Max. engine power: 2,1 kW
Fuel tank capacity: 500 cm
3
Oil tank capacity: 240 cm
3
Cutting length: 430 mm
Spark plug: NHSP LD/L8RTF, BOSCH/L8RTF
G
B
Loading ...
Loading ...
Loading ...