Loading ...
Loading ...
Loading ...
62
6.5.1: Door Sensor Removal
1. Remove the toe grill.
2. Disconnect the door sensor at the harness terminal behind the trim piece. See photo.
3. Remove the door sensor from the cabinet by starting in one of the upper corners and
peeling in a downward motion.
4. Once the sensor has been removed from the flange area:
a. Grasp the sensor with the right hand using the thumb and forefinger.
b. Grasp the electrical strip portion of the sensor between the thumb and
forefinger on the right hand.
5. Slowly work the sensor through the gap on the lower trim section to remove. The
upper portion of the electrical strip has some adhesive backing so care is advised.
Peel away from cabinet flange.
Sensor removed.
SERVICE BULLETIN 41013995:
Addresses issues with poor door to
switch contact. Available service kits
are: S41050470-BLK, S41050470-
WHT, and S41050470-SS.
Refer to “Service Bulletin Section” in
this manual.
Loading ...
Loading ...
Loading ...