Loading ...
Loading ...
Loading ...
268
Feed the capillary tube and suction line of
the new evaporator assembly (inside to
the outside) through the 1” hole.
Replace heater, defrost termination
thermostat, and zip tie the thermistor to
the evaporator.
Make certain that the drip pan drain fits
snuggly into the drain tube.
Install the 2 drain pan screws to secure
the evaporator assembly. REMEMBER to
stuff permagum into the 1” hole drilled
for the heat exchanger.
Insert the Insulation Tube over the suction tube / capillary assembly and zip tie in place.
The capillary tube on the bottom end can now be coiled and zip tied after determining
the length needed for installing into the filter drier.
Loading ...
Loading ...
Loading ...