Loading ...
Loading ...
Loading ...
©2018 DreamLine. All Rights Reserved
22ENIGMA-XO manual Ver 1 Rev 2 03/2018
Note: The adjustment disks in
the wheels are the same as the
disks in the Glass brackets and
can be rotated to adjust the
door glass to create a seal with
the wall.
See detailed
description on page 28.
TIP: Use a 3/16” shim beneath the
door glass when adjusting the level of
the door so that the glass does not
make contact with the guide block.
Fig 21
!
!
Fig 22
!
add threadlock to
the safety set screw
and wheel bolt
TIP: Mark the location of the
high spot on the outer surface of the
adjustment disk with a felt tip pen to
make adjustment easier to see.
Raise Door glassLower Door glass
Roller wheel adjustment disks
safety set screw
1 2
3
4
5
outside
safety set screw
inside
front view
Upper Guide Rail
side view
safety set screw
1 2
3
4
21. Attach two of the Rollers (#04) into the top holes on the
Door Glass (#05) with the wheels facing outside of the shower.
Apply Thread Lock Adhesive (#26) to the bolts and safety set
screws. Align the safety set screw towards the top for easier
access to retighten after installation. (See Fig 21 and page 30
for details)
Lift the door and position the Rollers (#04) onto the Upper
Guide Rail (#03) while carefully sliding the bottom edge of the
Door Glass (#05) into the groove of the Guide Block (#12).
If necessary, adjust the disks on both Rollers (#04) to ensure that
the bottom edge of the Door Glass (#05) does not touch the
bottom of the Guide Block (#12) (see details regarding
adjustment on page 28). (Fig 21 and 22)
NOTE: DO NOT attach the handle to the door glass until instructed
to do so. DO NOT attempt to lift the door glass with the handle as
this may result in damage to the glass and/or serious personal injury.
22. Attach two Rollers (#04) into the holes in the Door
Glass (#05) beneath the Upper Guide Rail (#03). Adjust
these Rollers (#04) to make conatct with the Upper Guide
Rail (#03). Apply Thread Lock Adhesive (#26) to the
bolts and safety set screws. Align the safety set screw
towards the bottom for easier access to retighten after
installation. (Fig 22)
Loading ...
Loading ...
Loading ...