DreamLine SHDR6172762006 User Manual

Loading ...

16ENIGMA-XO manual Ver 1 Rev 2 03/2018

Fig 14a

Fig 13

M5 X 10

ST4.2 X 40

Part#12 - Guide Block (with caps)

*see

note

use a pencil or

a center-punch

to mark the hole

only use anchor

with tile threshold

overhead view of threshold & guide block

Guide Block must be installed

square to the plane of the glass

1 2 3 4*

for 72” model

12. Fasten the Wall Bracket (#19) to the wall using the ST4.2×55 Truss Head Screw (#18). (Fig 13.1)

If installing the 72” model, repeat this step to install the Wall Bracket (#19) for the Small Stationary

Panel Glass (#23) (Fig 13.4).

Install the base parts of the Guide Rail Brackets (#08) onto both walls using the ST6×55 Large Truss

Head Screw (#10). Note that the adjustment set screws must be aligned vertically for easier access to

adjust for level if necessary after the glass is installed. Align the set screws vertically and tighten. (Fig 13)

13a. To install Guide Block (#12): Loosen the set screw and

remove the guide block face plate (Fig 14a.5). Apply silicone

to the underside of the Guide Block (#12) and screw the Guide

Block (#12) to the threshold as described below:

*NOTE:

◾For installation into an Acrylic Threshold:

drill a Ø1/8”(3mm) hole and use the ST4.2 x 40mm

Countersunk Screw (#17)

◾For installation into a Tile Threshold:

drill a Ø5/16”(8mm) hole, install a Wall Anchor 5/16” (#09b)

and use the ST4.2 x 40mm Countersunk Screw (#17).

The Guide Block (#12) must be screwed down. (Fig 14a)

Loading ...

DreamLine SHDR6172762006