Loading ...
Loading ...
Loading ...
Picture mode
EN
94
SETTINGS ON THE FLASH UNIT
Operating mode
TTL
Automatic camera control
A
SF40, SF60:
Automatic camera control, no flash exposure compen-
sation
SF58, SF64:
Control via the flash unit using a built-in exposure
sensor
M
The flash exposure must be set to an output level to
match the aperture and shutter speed settings
determined by the camera.
Notes
• Set the flash unit to TTL mode to allow automatic control of the
unit by the camera.
• When set to A, objects with above or below average brightness
may not be exposed correctly.
• Please read the relevant manual provided with third party flash
units regarding their various operating modes.
HSS (HIGH SPEED SYNC.)
Automatic flash activation at fast shutter speeds
A fully automated, camera-controlled HSS flash mode for all
shutter speeds and all exposure modes is available in the Leica
M10-R for use with system-compatible flash units (see p.92). It
is activated by the camera automatically if the selected or
calculated shutter speed is faster than the sync speed (1⁄180s).
Note
• The range for HSS flashes is significantly lower than for TTL
flashes.
Loading ...
Loading ...
Loading ...