Loading ...
Loading ...
Loading ...
Faced up the portafilter, then installed in parallel to the
machine from "Insert" to "Lock" in placed, otherwise the
coffee will splash and leak from the gap of the connection
position.
The pointer of the thermometer towards the espresso
area, and the “ ” indicator is illuminated, it shows the
heating is finished. Never skip to step 6 before the “ ”
indicator has been illuminated. As if the temperature is
not suitable for making espresso, it will effect the coffee
taste.
Press the Making Espresso button, the “ ” indicator will
be illuminated green. The espresso will flow out.
( To achieve a full flavor, each cup of espresso should be
not more than 30ml. )
NOTE:
1. When the machine starts to work, there will be some
noise out from the machine as it is pumping the water
with a high pressure.
2. While during operation , if there is suddenly a loud noise
from the machine, which may due to the water in the
water tank is not enough for pumping.
4.
5.
6.
3. When the water left the boiler is going to finished, it will
produce a louder noise. After adding water, it will operate
as usual.
Once desired amount of espresso is reached, press
Making Espresso button again to stop brewing.Take away
the cup. Espresso is done.During operation, if the
espresso is dripping out and doesn’t flow smoothly.
Please check if the water tank is not enough and add
water in time. If not, please check whether the coffee
powder is tamped too firmly, which will also cause the
espresso to flow unsmoothly.
The portafilter should be removed after a while as the
machine need to relieve the pressure. Otherwise,the
steam will splash out because of the strong
pressure.Please remove in parallel. Because high
pressure, the water will fully penetrate into the coffee
powder, it takes time for water to pass through and flow
out of the coffee powder. So it is normal that the excess
coffee will drip off.
7.
8.
Loading ...
Loading ...
Loading ...