Loading ...
Loading ...
Loading ...
TROUBLE SHOOTING
Symptom
The metal parts
in the tank have
rust.
Water leaks from
the bottom of
coffee maker.
Water leaks out
of outer side
of filter.
Acid (vinegar)
taste exists in
Espresso coffee.
Descaler is not recommended
type. It may corrode the metal
parts in the tank.
There is much water in
the drip tray.
The coffee maker is
malfunction.
When the water tank is pulled
up after use , it is normal that
there will be water left on the
desk.
As the water outlet at the
bottom of the water tank
is a movable part and it is
Not leaking.
There is some coffee powder
on filter edge.
The funnel is not installed
properly or rotated to the
right position.
Mill foaming is finished just
now or the steam is generated
just now, or the steam button
is not reset due to too high
temperature.
No clean correctly after
cleaning mineral deposits.
Coffee powder is stored
in a hot, wet place for a
long time. The coffee
powder turns bad.
Please clean the drip tray.
Please contact with the
authorized service facility
for repairing.
Get rid of them.
Install the funnel properly
and ensure the tunnel is in
the right position.
Operating after cooling
down.
Clean coffee maker per the
content in “before the first
use” for several times.
Please use fresh coffee
powder, or store unused
coffee powder in a cool,
dry place. After opening
a package of coffee
powder, reseal it tightly
and store it in a refrigerator
to maintain its freshness.
Use the descaler
recommended by
manufacturer.
Cause Corrections
Steam cannot
froth.
Do not take apart the appliance by yourself if the cause of failure is not
found, you had better contact the qualified servicing center.
The Milk Frothing indicator
is not illuminated.
Only after the Milk
Frothing indicator is
illuminated, the steam
can be used to froth.
Use high and narrow
container.
Use whole milk or
half-skimmed milk
Clean the steam nozzle
immediately after use
every time with wet sponge.
The container is too big
or the shape not fits.
You have used skimmed
milk
There is some dirt inside
the steam nozzle
Coffee maker
cannot work
any more.
Power outlet is not plugged
well.
Plug the power cord into a
wall outlet correctly, if the
appliance still does not
work, please contact with
the authorized service
facility for repairing.
Uninstall the portafilter in parallel from the coffee outlet
from the direction of "Lock" to "Insert", then put it down.
Pour away the coffee powder.
Press the Making Espresso button, the" " indicator will
be illuminated. The water will come out and flush out the
coffee powder inside.
Press Making Espresso button again to stop brewing.And
rinse the seal ring with cloth.
Loading ...