USER MANUAL
WT-03
4. Initial Smart Life App Setup
3. Initial Water Timer Setup
Need Help?
Thank You
1. Warm Tips：
Bluetooth Water Timer
support@diivoosmart.com
The best range for connection and control is within
49.2 in the open area.
The bluetooth water timer does not support Alexa &
Google voice or remote control.
Do not use your timer when the air temperature is
below 40℉(4.5℃), the timers should be removed from
the hose faucet and stored indoors to avoid potential
frozen damage.
Filter can trap dirt particles, please clean filter regularly
and replace if worn.
Do not mix alkaline, standard (carbon-zinc), or
rechargeable (nickel cadmium) batteries. Used up or
dead batteries must be removed from the timer and
disposed of properly.
Please replace batteries when the low battery indicator
appears the display. When replacing the power unit,
please make sure that the water timer is dry.
To prevent leakage, make sure that the water timer is
tightly attached to the faucet and hose, add rubber
washer and thread seal tape if necessary.
Specification:
Scan the QR code and download the free Android or
IOS app, then install the APP. If you have already
installed the Smart Life APP, go to step 2.
Tap "Add device" or "+" to add the smart device
in app. Select "Industry&Agriculture" > "Water
valve controller(BLE)".
Waiting for connecting to be 100%. Edit the
name of your water timer completed.
1
Download the Smart Life App
Create an account or login with an existing account
to begin timer setup.
3
Open the Smart Life App
4
Add a Device
1. Remove the tray on the back of the timer by sliding
or pulling it out.
2. Insert two AA (1.5V) alkaline batteries and replace
the tray. Please do not insert rechargeable batteries
to avoid low voltage.
Connect the timer to an outdoor hose faucet.
Your timer is now ready to be used with any product
that can be attached to a standard hose faucet.
Do not place the timer in an underground valve
box or anywhere your Bluetooth signal will be
obstructed.
The water must remain on for the timer to work
properly.
1
3
Insert Two AA Batteries
2
Install the Timer
Turn on Your Water
If you have any questions, please feel free to contact us first.
We are always here for you.
2. Meet the Diivoo Hose Faucet Timer
Hose Faucet Connection
ON/OFF Button
Fitting NH3/4”
LED Light
Outlet
Long press water timer the “On/OFF button” for 6s
until the green light flashes quickly, keep the water
timer is in pairing mode.
2
Enter configuration Mode
On/OFF button
Note:
Note:
a. Need to pull out forcefully
when installing the battery.
b. The Battery slot cannot be
inserted backwards, forcibly
inserting it will cause damage
to the battery slot.
Filter
50 without interference
7.25-116 Psi
40.1℉-113℉(4.5℃-45℃)
24H/48H/72H
IPX5
Bluetooth Range
Working Water Pressure
Working Temperature
Rain Delay Time
Waterproof
USER MANUAL
WT-03
4. Initial Smart Life App Setup
3. Initial Water Timer Setup
Need Help?
Thank You
1. Warm Tips：
Bluetooth Water Timer
support@diivoosmart.com
The best range for connection and control is within
49.2 in the open area.
The bluetooth water timer does not support Alexa &
Google voice or remote control.
Do not use your timer when the air temperature is
below 40℉(4.5℃), the timers should be removed from
the hose faucet and stored indoors to avoid potential
frozen damage.
Filter can trap dirt particles, please clean filter regularly
and replace if worn.
Do not mix alkaline, standard (carbon-zinc), or
rechargeable (nickel cadmium) batteries. Used up or
dead batteries must be removed from the timer and
disposed of properly.
Please replace batteries when the low battery indicator
appears the display. When replacing the power unit,
please make sure that the water timer is dry.
To prevent leakage, make sure that the water timer is
tightly attached to the faucet and hose, add rubber
washer and thread seal tape if necessary.
Specification:
Scan the QR code and download the free Android or
IOS app, then install the APP. If you have already
installed the Smart Life APP, go to step 2.
Tap "Add device" or "+" to add the smart device
in app. Select "Industry&Agriculture" > "Water
valve controller(BLE)".
Waiting for connecting to be 100%. Edit the
name of your water timer completed.
1
Download the Smart Life App
Create an account or login with an existing account
to begin timer setup.
3
Open the Smart Life App
4
Add a Device
1. Remove the tray on the back of the timer by sliding
or pulling it out.
2. Insert two AA (1.5V) alkaline batteries and replace
the tray. Please do not insert rechargeable batteries
to avoid low voltage.
Connect the timer to an outdoor hose faucet.
Your timer is now ready to be used with any product
that can be attached to a standard hose faucet.
Do not place the timer in an underground valve
box or anywhere your Bluetooth signal will be
obstructed.
The water must remain on for the timer to work
properly.
1
3
Insert Two AA Batteries
2
Install the Timer
Turn on Your Water
If you have any questions, please feel free to contact us first.
We are always here for you.
2. Meet the Diivoo Hose Faucet Timer
Hose Faucet Connection
ON/OFF Button
Fitting NH3/4”
LED Light
Outlet
Long press water timer the “On/OFF button” for 6s
until the green light flashes quickly, keep the water
timer is in pairing mode.
2
Enter configuration Mode
On/OFF button
Note:
Note:
a. Need to pull out forcefully
when installing the battery.
b. The Battery slot cannot be
inserted backwards, forcibly
inserting it will cause damage
to the battery slot.
Filter
50 without interference
7.25-116 Psi
40.1℉-113℉(4.5℃-45℃)
24H/48H/72H
IPX5
Bluetooth Range
Working Water Pressure
Working Temperature
Rain Delay Time
Waterproof
4. Meet the Diivoo App Home Screen
5. Additional Water Timer Features
6. Troubleshooting
A1:
Programming is incorrect
Water pressure is too low
Particles of dirt or debris stuck in valve
More than one start time is programmed with
overlapping schedules
Manual watering is on
Faulty valve
The batteries were low
The faucet is off.
Q1: Why the Bluetooth water timer didn't turn
on/off at preset time?
A3:
If your are gravity feed system such as rain barrel
system, then it won't work and will keep low water
pressure. Gravity feed has no real pressure when
dealing with a rain barrel. It needs pressure
measuring.
The timer have 1 year warranty since the day of
purchase. If you have any questions, please feel free
to contact via
We will follow up and respond within 24 hours.
The following conditions are not included：
Problems occur due to its use for other purposes,
or improper use or use of components not supplied
by Diivoo.
Damages caused by improper use, for example,
wrong of power supply, artificial damage, etc.
Q3: Why is the water timer out of little water?
the home page of the APP, or disconnect the Bluetooth
from your phone and turn it on again
If the device has been connected by other mobile
phones, please disconnect first.
Make sure the device battery is charged and place the
phone as close to the device as possible.
Please note that you don't need to stay connect once
you setup your schedule. The device will always keep
your watering settings and work automatically
according to the schedule.
A2:
The Bluetooth of water timer is currently in sleep
mode, please wait 5-10 seconds, the device will
automatically reconnect. Or scroll down to refresh
Q2: Why Bluetooth keeps dropping connection?
Setting
Weather
Battery Life
Next Schedule
Last Irrigation Time
Manual Watering Function
Rain Delay
Timing
Irrigation Record
Remote Control
Your timer has the ability to allow you to manually
water without disturbing the programmed schedule.
Manual is used to test equipment, run an extra watering
cycle in an area, or to use the hose faucet without
removing the timer.
Click the button to activate manual watering.
Using the app you can click set how long you want
the preset manual cycle to run for.
1 Manual Watering
2
Stop Watering
7. Support
Click the and button to add a watering
scheduel.
1
2
Two irrigation modes:
Normal Scheduel: Water for a particular period in
a day. At this mode, you can:
Select (Start time)to decide when you want the device
to start watering .
Select(Irrigation Duration)choose the time of day
you want to watering.
Select days of the week to decide which day or
days you want watering.
Select (Start time)to decide when you want the device
to start watering and Select (End time)to stop watering.
(Cycle Duration) Determine how long to water.
(Pause Duration) Set the pause time.
Select days of the week to decide which day or days
you want watering.
Cycle/Soak: Water for a certain period for several
time in a day. At this mode, you can:
You can stop the flow of water at any time whether it is
during manual watering, or during a programmed time.
Click the button once to stop watering.
3
Rain Delay Function
The rain delay function allows you to postpone watering
for 24h, 48h or 72h due to rain or when the ground is
already wet. Click the button to activate manual watering.
Using the app you can click set how long you want
the preset rain delay feature .
Normal Scheduel Cycle/Soak
4. Meet the Diivoo App Home Screen
5. Additional Water Timer Features
6. Troubleshooting
A1:
Programming is incorrect
Water pressure is too low
Particles of dirt or debris stuck in valve
More than one start time is programmed with
overlapping schedules
Manual watering is on
Faulty valve
The batteries were low
The faucet is off.
Q1: Why the Bluetooth water timer didn't turn
on/off at preset time?
A3:
If your are gravity feed system such as rain barrel
system, then it won't work and will keep low water
pressure. Gravity feed has no real pressure when
dealing with a rain barrel. It needs pressure
measuring.
The timer have 1 year warranty since the day of
purchase. If you have any questions, please feel free
to contact via
We will follow up and respond within 24 hours.
The following conditions are not included：
Problems occur due to its use for other purposes,
or improper use or use of components not supplied
by Diivoo.
Damages caused by improper use, for example,
wrong of power supply, artificial damage, etc.
Q3: Why is the water timer out of little water?
the home page of the APP, or disconnect the Bluetooth
from your phone and turn it on again
If the device has been connected by other mobile
phones, please disconnect first.
Make sure the device battery is charged and place the
phone as close to the device as possible.
Please note that you don't need to stay connect once
you setup your schedule. The device will always keep
your watering settings and work automatically
according to the schedule.
A2:
The Bluetooth of water timer is currently in sleep
mode, please wait 5-10 seconds, the device will
automatically reconnect. Or scroll down to refresh
Q2: Why Bluetooth keeps dropping connection?
Setting
Weather
Battery Life
Next Schedule
Last Irrigation Time
Manual Watering Function
Rain Delay
Timing
Irrigation Record
Remote Control
Your timer has the ability to allow you to manually
water without disturbing the programmed schedule.
Manual is used to test equipment, run an extra watering
cycle in an area, or to use the hose faucet without
removing the timer.
Click the button to activate manual watering.
Using the app you can click set how long you want
the preset manual cycle to run for.
1 Manual Watering
2
Stop Watering
7. Support
Click the and button to add a watering
scheduel.
1
2
Two irrigation modes:
Normal Scheduel: Water for a particular period in
a day. At this mode, you can:
Select (Start time)to decide when you want the device
to start watering .
Select(Irrigation Duration)choose the time of day
you want to watering.
Select days of the week to decide which day or
days you want watering.
Select (Start time)to decide when you want the device
to start watering and Select (End time)to stop watering.
(Cycle Duration) Determine how long to water.
(Pause Duration) Set the pause time.
Select days of the week to decide which day or days
you want watering.
Cycle/Soak: Water for a certain period for several
time in a day. At this mode, you can:
You can stop the flow of water at any time whether it is
during manual watering, or during a programmed time.
Click the button once to stop watering.
3
Rain Delay Function
The rain delay function allows you to postpone watering
for 24h, 48h or 72h due to rain or when the ground is
already wet. Click the button to activate manual watering.
Using the app you can click set how long you want
the preset rain delay feature .
Normal Scheduel Cycle/Soak
