Loading ...
Loading ...
Loading ...
18 / 90 EN Over The Range Microwave Oven / User Manual
CONTROLS6
Melt/Soften Item Chart
Press Pad Display
Soften
Item
Weight
Once S-1
Butter
1
/2 cup
Twice S-2
Chocolate 8 oz
Three Times S-3
Ice Cream
1
/2 gallon
Four Times S-4
Cheese 1 plate
Keep Warm
KEEP WARM feature maintains food at a warm
temperature for 30 minutes.
1. Press KEEP WARM pad.
2. Press START pad.
When pressing KEEP WARM pad, the display
shows "30:00".
When the cooking time ends, you will hear 3
beeps.
Time Cook
1. Press TIME COOK pad.
2. Press number pads for the cooking time.
3. Press POWER LEVEL pad.
4. Press number pads for power level (0~10).
5. Press START pad.
The COOK indicator lights and ENTER, TIME in-
dicators blink., “ : 0” is displayed.
The display will show what you pressed.
The display will show PL10 for 100% power.
The display will show PL-0 ~ PL10.
If you skip steps 3 and 4, 100% power is
automatic.
When you press START pad, the COOK indicator
starts blinking to show the oven is cooking.
The display counts down the time to show how
much cooking time is left. When the cooking time
ends, you will hear 3 beeps.
NOTE:
• Your oven can be programmed for 99 minutes
99 seconds (99:99).
• Using lower power levels increases the cook-
ing time which is recommended for foods such
as cheese, milk and slow cooking of meats.
Cooking in Two Stages
This feature lets you program two sequential op-
erations such as defrosting and cooking or cook-
ing using two different power levels. It automati-
cally changes power settings and cooking time.
Defrosting + Cooking
1. Press DEFROST pad once.
2. Press number pads for the desired defrosting
time.
3. Press TIME COOK pad.
4. Press number pads for the cooking time.
5. Press POWER LEVEL pad.
6. Press number pads for power level (0~10).
7. Press START pad.
The DEF indicator lights and ENTER, TIME indi-
cators blink, “ : 0” is displayed.
The display will show what you pressed.
The COOK indicator lights and ENTER, TIME in-
dicators blink., “ : 0” is displayed.
The display will show what you pressed.
The display will show PL10 for 100% power.
The display will show PL-0 ~ PL10.
If you skip steps 5 and 6, 100% power is
automatic.
When you press the START pad, the DEF and
COOK indicators come on to confirm the power
levels selected. The DEF indicator starts blinking
TINSEB594MRR0_BOTR30102SS_Blomberg OTR_User Manual.indd 18TINSEB594MRR0_BOTR30102SS_Blomberg OTR_User Manual.indd 18 10/5/20 11:51 AM10/5/20 11:51 AM
Loading ...
Loading ...
Loading ...