Loading ...
Loading ...
Loading ...
TROUBLESHOOTmNG
ProMem
Detergent fails to mix with spray.
Engine runs gooc] at no-moat] but
"bogs" when moat] is addec]°
Engine shuts clown c]uring
operadon_
Cause
I. Nozzle in low pressure mode.
2. VVater inlet is blocked.
3. Inadequate water supply.
4. Inlet hose is kinked or leaking.
S. Clogged inlet hose strainer.
6. VVater supply is over 100°E
7. High pressure hose is blocked or
leaks.
8. Gun leaks.
9. Orifice is obstructed.
10. Pump is faulty.
I. Detergent siphoning tube is not
submerged.
2. Chemical filter is clogged or
cracked.
3. Dirt}, in-line filter.
4. Nozzle is in high pressure mode.
Engine speed is too slow.
Out of gasoline.
Correction
I. Pull nozzle backward for high
pressure mode.
2. Clear inlet.
3. Provide adequate water flow.
4. Straighten inlet hose, patch leak.
5. Check and clean inlet hose
strainer.
6. Provide cooler water supply.
7. Clear blocks in outlet hose.
8. Replace gun.
9. Clean orifice.
10. Contact Authorized service facility.
I. Insert detergent siphoning tube
into detergent.
2.. Clean or replace filter/detergent
3. See "Check InoLine Filter".
4. Push nozzle forward for low
pressure mode.
Hove throttle control to FAST
)osition. If engine still "bogs down",
contact Authorized service facility.
Fill fuel tank.
Loading ...
Loading ...
Loading ...