Troy-Bilt 020207 Pressure Washer

Owner's Manual - Page 16

For 020207.

PDF File Manual, 36 pages, Read Online | Download pdf file

020207 photo
Loading ...
Loading ...
Loading ...
Storage
PREPAPdNG THE fJNmT
FOP, STORAGE
Water shouH not remain inthe unitforHongperiodsof
time.Sedimentsor mineralscan depositon pump partsand
"freeze" pump action. If you do not pHan to use the pressure
washer for more than 30 days, follow this procedure:
I. Flush detergent siphoning tube by placing the filter into
a pail of clean water while running pressure washer in
low pressure mode (adjustable nozzle in the forward
position). Flush for one to two minutes.
2. Shut off the engine and let it cool, then remove high
pressure and garden hoses. Disconnect spark plug wire
from spark plug.
3. Empty the pump of all pumped liquids by pulling the
recoil handle about 6 times.This should remove most
of the liquid in the pump.
4. Use PumpSaver to prevent corrosion build up and
freezing of pump.
5. Store unit in a clean, dry area.
Protecting the Pump
To protect the pump from damage caused by mineral
deposits or freezing, use PumpSaver to treat pump.This
prevents freeze damage and lubricates pistons and seals.
NOTE: PumpSaver, model number 01559, is available as an
optional accessory. [t is not included with the pressure washer.
Contact the nearest authorized service center to purchase
PumpSaver.
Failure to do so will permanently damage your pump and
render your unitinoperable,
Freeze damage is not covered under warranty.
CAUTION
Always wear eye protection when using PumpSaven
To use PumpSaver, make sure the pressure washer is
turned off and disconnected from supply water. Read and
follow all instructions and warnings given on the PumpSaver
container.
NOTE t PumpSaver will drip from pump after treatment
and will stain wood and concrete.
NOTE t [f PumpSaver is not available, draw RV antifreeze
(non-alcohol) into the pump by pouring the solution into a
3-foot section of garden hose connected to inlet adapter
and pulling recoil handle twice.
STORING THE ENGINE
See the engine owner's manual for instructions on how to
properly prepare the engine for storage.
Loading ...
Loading ...
Loading ...