Loading ...
Loading ...
Loading ...
Section 4: Operation
9,
Start engine according to instructions given in engine
owner's manual.Also see operating instructions tag
located on the pressure washer.
WARNING
. When starting engine, pull cord slow.ty undJ resistance is felt
and then pull rapidly to avoid kickback.
if engine starts and fails to continue to run or if increased
resistance is felt during starting pull attempts, squeeze trigger
on spray gun.
NOTE: Always keep the throtde lever in the "Fast"
>osition when operating the pressure washer.
WARNING
, DO NOT touch hot surfaces,
Allow equipment to cool before touching.
The pressure washer must be at least 5 feet from structures
having combustible walls and/or other combustible materiais.
, Keep at least 3 feet of clearance on all sides of pressure
washer for" adequate cooling, maintenance and servicing.
, in the State of California a spark arrester is required by bw
(Section 4442 of the California PuNic Resources Code). Other
states may have similar laws. Federal laws apply on federal
lands, if you equip the muffler with a spark arrester; it must be
maintained in effective working order:
Now to Stop Your Pressure Washer
I. Let engine idle for two minutes.
2. Turn engine off according to instructions given in
engine owner's manual
3. Squeeze trigger on spray gun to relieve trapped
pressure in hose to avoid injuryo
NOTE: A small amount of water will squirt out when
3ressure is released,
WARNING
Keep high pressure hose connected to pump and spray gun
whiie system is pressurized,
Squeeze trigger on spray gun to relieve trapped pressure,
every time you stop engine. Engage trigger lock on spray gun.
4. Engage trigger lock on spray gun when not in use,
Loading ...
Loading ...
Loading ...