Loading ...
Loading ...
Loading ...
location and function of the electronic indicator system
BATTERY COVER RELEASE SLOTS
• OPEN BATTERY OPEN • _ j
ELECTRONIC
MEASUREMENT
BATTERY COVER
ON/OFF KEY
BEVEL ANGLE KEY
BLADE TENSION KEY
KEY (FT. PER MIN.)
REFERENCE SET KEY
DIGITAL READOUT DISPLAY
DIGITAL READOUT DISPLAY
The Liquid Crystal Display, or LCD, on this saw
gives the user the ability to accurately position the
blade and monitor the set-up. The three functions
displayed are:
Bevel Angle - Shows the present angle of the blade
to thetable. The _ key is used to set thezero
degree point.
Blade Tension - Displays the blade size for which the
tension has been adjusted.
Blade Speed - Displays the speed of the blade in
surface feet per minute (FPM).
NOTE: The function being displayed is indicated by
an abbreviated name of the function in the left hand
area of the display; either BEV, TEN, or FPM.
BATTERY COVER
The Battery Cover covers the battery compartment.
To.release the cover, insert a small coin into one of
the release slots and twist. Remove the cover.
1. Installing the Battery
The battery is supplied with the loose parts. It is a
6-volt, type J alkaline battery. Install the battery
with the contact end down and the "+" terminal
towards the left. Push the battery down and back
until the top edge of the battery is caught under
the ribs in the compartment. Do not force the
battery. It if doesn't push in easily, remove the
battery and check that it is positioned correctly.
2. Reinstall battery covery by inserting the tabs on
the lower edge of the cover into the mounting
holes in the control and pushing the cover into
position.
FUNCTION KEYS
The five keys located to the right of the display are
the function keys. They are:
[_-- Turns the display "On" or "Off"
-- Selects the Bevel Angle display
I-_-- Selects the Blade Tension display
m Selects the Blade Speed display
["EFS'Ti -- Sets the Bevel Angle to Zero
NOTE: In order to extend battery life the display will
shut off approximately five (5) minutes after the last
key was pressed.
19
Loading ...
Loading ...
Loading ...