Loading ...
Loading ...
Loading ...
I NSTALLATI O N
Door Reinstallation
Materials Needed:
• Phdhps screwdriver
• ,,. hex head driver
1. hlstall hinge assembhes:
• hlstall center hinge with Philhps screws.
2. Place hinge side of refrigerator door
on center hinge pill.
.
.
5.
• hlstall top hinge with %,."hex head
screws.
While holding refrigerator door _.
upright, tighten down top hinge
with %(' hex head driver.
Reconnect two-pin connector.
Replace top hinge covers.
Handles [style varies by model)
This handle style is installed at the factory. Style may
vary by model.
Materials Needed:
• "%_;'Allen wrench
To Remove:
• Renlove set screw fronl
handle mounting post
using tile -%_:'Allen
wrench.
• Repeat the procedure on
all posts to remove the
handle.
To replace:
• Ahgn handle with the mounting posts.
• Fully tighten all set screws to secure handle
m place.
Metal Handle
Materials Needed:
• "__"Allen wrench
• Gloves to protect hands
I Note: Metal handles scratch doors.
call
I
To Remove:
• Loosen set screws In handle using -_._2"Allen
wrench.
• Repeat the procedure on all screws.
To Replace:
• Ahgn handle w_th the mountHlg posts.
• Apply upward pressure to the handle and hold.
• Fully tighten all set screws to secure handle in
place.
Opening and Closing Your
Fresh Food Doors
Your new refrigerator is uniquely designed with two
fresh food doors. Dther door can be opened or closed
independently of one another.
There is a vertically-hinged section on the left fresh
food door. When the left door is closed, the hinged
section automatically forms a seal between the two
doors when both doors are closed.
When the left door is opened, the hinged seal
automatically folds inward so that it is out of the way.
To avoid electrical shock which can cause severe
personal injury or death, DO NOT attempt to remove
the hinged seal from the fresh food section.
To avoid possible product damage, ALWAYS verify
that the hinged seal is folded against the edge of
the door prior to closing.
r.__-j ,.
I
I'\
I'l,,r<_
I_ r hinged s_ctiOn
I
Loading ...
Loading ...
Loading ...