Loading ...
Loading ...
Loading ...
CARE AND CLEANING
Replacing Light Bulbs
Fresh Food Section
(style of light shield varies)
1. Slide clear light shield toward
back of compartment to
release from light assembly.
2. Remove light bulbs.
3. Replace with appliance bulbs
no greater than 40 watts.
i ii ili,'ii,'i! !i! i!!iii
4. Replace light bulb cover by inserting tabs on light
shield into liner holes on each side of light
assembly. Slide shield toward front of refrigerator
until it locks into place. Do not force shield beyond
locking point. Doing so may damage light shield.
Freezer (style of light shield varies)
1. Reach behind the light
cover.
2. With firm pressure, press
forward on the notches at
the back of the cover and
pull down. The cover will
open from the back.
3. Remove the cover.
,
5.
Remove light bulb.
Replace bulb with
appliance bulb no
greater than 40 watts.
Insert front tabs of light
cover into slots in freezer
liner and snap rear portion
over light assembly until rear
tab engages.
Glass Doors (selectmodels)
To protect the glass doors:
1. Do not use abrasive cleaning agents such as steel
wool scouring pads or powdered cleaners as they
may scratch the glass.
2. Do not hit the glass with pots, pans, furniture, toys,
or other objects.
3. Do not close the door until the shelves and
drawers are in place.
Scratching, hitting, jarring or stressing the glass may
weaken its structure causing an increased risk of
breakage at a later date.
24
Loading ...
Loading ...
Loading ...