Loading ...
Loading ...
Loading ...
Page 52 of 66
BURNER CARE:
The burners should be visually inspected once a year. To access the burners, first make
sure the grill is completely cooled. Ensure the control valves are in the OFF position
and turn off the main gas
supply. Open the roll dome or remove completely. Carefully
remove the cooking grates as they are heavy. The radiants and burners are now exposed.
Visually inspect the burners to confirm they are structurally sound. You have the option
of removing the radiant to gain better visual access if desired (See “Figure 17” for further
details).
It is unlikely the burners in your grill will become dirty. However, they may be cleaned
using a brass brush if necessary. Gently brush off any debris, being careful not to
dislodge the burners. Clogged burner ports may be opened up with a straightened
paper clip. Do not use a toothpick or anything else that could break off inside the
burner ports. To remove the burners for cleaning, remove the burner pin and swing
the radiant and burner to either side of the retaining bracket to lift and remove the
burner
(See “Figure 17” for further details).
After cleaning the burners, you must make
sure the venturi opening of the burner is centered over the brass orifice when
replacing the burner. Once the burners are in place, reassemble the grill and visually
inspect the gas hose before lighting.
ORIFICE CLEANING:
Clogged orifices create a dangerous condition that must be resolved before the grill
may be used. If you are not entirely comfortable with the procedure, please use a
licensed technician or contact Crown Verity customer service at 1-888-505-7240
The orifices can be accessed once the burners are removed. Remove the brass orifice
using a 1/2 inch ratcheting socket wrench (See “Figure 18” for further details).
Shine a flashlight through the orifice to look for any obstructions. Remove obstructions
with a needle. Use extreme care not to enlarge the hole. Reinstall and tighten the orifice.
Re-install the burner ensuring it is centered on the orifice. Test fire the burners and check
for proper flame characteristics.
IGNITER BATTERIES:
For appliances not equipped with a lighting package, t
he electronic ignition system is
battery operated. If you do not hear a rapid and strong clicking sound when you press
and hold the operating knob, you may need to change the batteries.
Loading ...
Loading ...
Loading ...