Loading ...
Loading ...
Loading ...
Page 42 of 66
FIGURE 12B. VALVE POSITIONS SIDE BURNER WITHOUT LIGHT PACKAGE
MANUAL LIGHTING PROCEDURE:
•
Open the grill roll dome.
•
Make sure the main burner valve is the OFF position (See “Figures 11 and 12”).
•
Turn the main gas supply on and wait 15 seconds.
•
Turn the pilot valve to the on position.
•
Insert a barbeque lighter into the hole located behind the wing door on the face of the grill
(See “Figure 13”).
•
Visually inspect to see that the pilot tube is lit.
•
Turn the main burner valves on to the desired temperature setting (See INDEX: “General
Operating Procedures” for guidelines on how to determine ideal temperature settings).
Ignition should take place within 2 to 3 seconds. Verify that the burners are lit by looking
through the grates on the cooking surface (See “Figure 14”). If the burners do not light
within this time, turn the temperature knob to the OFF position and wait 5 minutes for the
gas to dissipate before trying again. If the unit will not light after multiple attempts, refer to
the troubleshooting section of this manual.
A
C
D
Loading ...
Loading ...
Loading ...