Loading ...
Loading ...
Loading ...
Serf-Clean Oven
- it is normal for parts of the oven to become hot during a
- To prevent damage to oven door do not attempt to open
the door when LOCK is displayed.
• Avoid touching door, window or oven vent area during a
clean cycle.
, Do not use commercial oven cleaners on the oven finish
or around any part of the oven. They will damage the
finish o_ parts.
The self-clean cycle uses above-normal cooking temperatures
to automatically clean the oven interior.
It is normal for flare-ups, smoking, or flaming to occur during
cleaning if the oven is heavily soiled. It is better to clean the
oven regularly rather than to wait until there is a heavy build-
up of soil in the oven.
During the cleaning process, the kitchen should be well
ventilated to get rid of normal odors associated with cleaning.
Before Se f-Cleaning
1. Turn off the oven light before cleaning. The oven light may
burn out during the clean cycle.
2. Remove broiler pan, all pans, and oven racks from the
oven. The oven racks will discolor and may not slide easily
after a self-clean cycle if they are not removed.
3. Clean oven frame, door frame, area outside of gasket, and
around the opening in the door gasket with a nonabrasive
cleaner such as Bon Ami* or detergent and water. The
self-cleaning process does not clean these areas. They
should be cleaned to prevent soil from baking on during
the clean cycle. (The gasket is the seal around the oven
door and window.}
4. To preventda,eage, d onotclean or ,_ _'___
rub the gasket around the oven
door. The gasket is designed to __t_
seal in heat during the clean cycle.
5. Wipe up excess grease or spill-
overs from the oven bottom. This
prevents excessive smoking, flare-ups or flaming during
the clean cycle.
6. Wipe up sugary and acidic spillovers such as sweet
potatoes, tomato, or milk-based sauces. Porcelain enamel
is acid-resistant, not acid-proof. The porcelain finish may
discoior if acidic or sugary spiiis are not wiped up before a
self-clean cycle.
To set Self-Clean:
1.
2.
Note: Oven temperature must be below 400° F to
program a clean cycle.
Close the oven door.
Pressthe Clean pad.
° CLEAN flashes.
° SET flashes in the display. (}
Pressthe Autoset 0 pad. Autoset
° MEd (Medium Soil, 3 hours} is displayed.
Press the Autoset 0 pad to scroll through the self-cleaning
settings.
HVy (Heavy'Soil, 4 hours}
MEd (Medium soil, 3 hours}
LITE( Light Soil, 2 hours}
Choosing the soil level of the oven automatically programs
the self-cleaning time.
After four seconds, the oven wiii start cleaning.
° If the door is not closed, beeps wiii sound and "door" wiii
display. If the door is not closed within 30 seconds, the
self-cleaning operation wiii be canceled and the display
will return to the time of day.
° CLEAN wiii appear in the display.
° LOCK wiii flash in the display. Once the door iocks, the
word wiii remain steady.
° The cleaning time wiii start counting down in the display.
To Delay a Semf-Olean Cycle:
1. Pressthe Delay 1 pad. 1
/
° DELAY flashes.
Delay
2.
3.
, 00:00 wiii flash in the display.
Enter the amount of time you want to delay the cycle using the
appropriate number pads.
Pressthe Clean pad.
° SET flashes in the display.
Pressthe Autoset 0 pad.
° LITE(Light soii ievei} is displayed.
dean
0
_\utoset
* Brand names for cleaning products are registered trademarks of the respective manufacturers.
18
Loading ...
Loading ...
Loading ...