Loading ...
Loading ...
Loading ...
: QUICK REFERENCE PAGE
.
"3.
. . 4o
......... Read-and-fottowall-Safety-R[ilb__i_,-and Operating Instructions.
Failure to do so can result in serious injury. _
7.
" .8.
page
SPECJAL SAFETY SECTION. .............................. .. :. ................. 3-5
PREPARA_ON ............................................................. 3-5
1. Wear personal protective gear -- gloves; safety footwear;, snug fitting clothing; and eye,
hearing and head protection,
2. Check fo_worn,loose, missingordamagedpartsandrepairorreplaceas necessary. •
3. Check the chain for sharpness and tension.
4. Keepchildren,bystanders:andanimaJsa minimumof30feet (10meters)awayfromwork area.
5. Plan your sawing operation carefully in advam,_e.
FUELAND OIL ............................................................. g&10
1. Eliminate all sources of sparks or flame where fuel is mixed, poured, or.stored.
2. Use:1part air<_o.Led,2-cycte englneoil to:lSpa,'ts_',_g'_arunteadedgasoline.
3. Use gasoline not over 2 months old.
4. Mix and pour fuel in anapproved, markedcontainerand in an outdoor area.
5. Move a minimum of 10 feet (3 meters)away from fuel and fueling site before starting engine.
6_ Fiti the ,_1 t_nk ,_ach dime _he fuel tank is refueled.
STARTING THE ENGINE ........................................................ 1-1
1. Hold saw firmly with the saw chain free to turn without making contact with any object.
•2. Hold front handlebar with left hand &ptace right foot through rear handleto stabilize saw,
3. Use less than the fullextent of the starterrope per pull;
4. Release the trigger after engine-starts allowing engine tO idle:
OPERATING THE UNIT ......................................................... I:='
l. Cut wood only.
2. Accelerate the engine.to full throttte before entering the cut.
3. Begin cutting with spur against the log.
4. Cut only at furl throttle.
5. Release the trigger as soon as the cut is completed.
6. Stop the engine before settingthe saw down after cutting.
MAINTENANCE .............................................................. lt_
1. Adjust orhave the carburetor,adjusted if the chain.moves .when the engine: idles,
Disconnect" spark plug befor,e:.pet:forming_maintenanoe except for _:arburetor-.adjustment.
Check the guide bar for wear each:timethe chain is sharpened.
Clea_nthe air filter frequently and always after 10 tanks of fueim_xture or 5 hoursOf o_er_tion,
Whichever is tess.
5. -Cleansparkarres_r screen_atleastonce foreach25-30 hoursofOpera,on.
6. Take the saw to yourSears Service Center for full clutch inspection after each .100 hours
of operation.
Drain-fueltank in a safe mannerbeforestodngthe unitfor 30 or more.days.
Store saw in a dry.place out of the reach of children.
WATCH OUT F'OR •
KICKBACK
NOT USE
THE SAW WHEN
IT NEEDS REPAIR
NEVER USETHE SAW
WHEN TIRED
USEA FIRM GRiP
WITH BOTH,HANDS
............. L '
•27
Loading ...