Loading ...
Loading ...
Loading ...
1-t/2" HEX LOCKWASHER
HD. SCREW
5. Mount switch to guide bar with 2 hex head screws,
5/16-18 x 3/4 Iockwashers, and nuts, Securely
tighten both nuts.
6. insert 1-1/2 inch long screw through externa!
Iockwashers, fiat washer and through the second
ho_e in the guide bar. Place t/2 inch long spacer
over screw thread& Swing g uide bar to horizontal
position and screw the hex head screw into the
center hole of the table skirt. Finger tighten both
guide bar mounting screws.
FLAT WASHER
3/4" HE× HD.
SCREW .......
LOCKWASHER
LOCKWASHER
7. Insert one inch Ion.q. screws in first and third
t_oles of the rear guide bar and attach to tame
the same wav as the front bar
8 inset[ ends of FENCE GUIDE BAR ROO
through holes _n bars as illustrated
NOTE: The ends of the RODare not threaded o
the SELF THREADING NUTS wdl cut threads
on the rod as they are screwed on. Just start nuts
onto ends of rod,
1 HEX HD.
SCREW
WASHER
\
LOCKWASHER \ ._;;_
'%" '_d"
SELF.THREADING NUT NUT _,__ X_-_r
BAR aOO --_/' {
REMOVE 3 SCREWS FROM
REAR OF TABLE EXTENSION
BEFORE 0NSTALLING GUIDE
9. Hold rod with one hand and with a 1/2 in, wrench
or phers start screwing on ONE of the nuts only
A TURN OR TWO screw on other nut the
same way
t0. Using TWO !/2 in. wrenches or pl_ers tighten
both of the nuts.
14
Loading ...
Loading ...
Loading ...