Loading ...
Loading ...
Loading ...
Setting Surface Controls
Triple element
The cooktop is featured with a triple radiant surface
element located on the right front cooktop (See Fig. 1).
Selector keys and indicator lights on the control panel are
used to set and indicate what portions of the Triple radiant
element will heat. The single light indicates that only the
inner element will heat (Fig. 3). The double light indicates
that both inner and middle elements will heat together (Fig.
4). The triple light indicates that all 3 portions of the
element will heat together (Fig 5). You may switch between
all of these different settings at any time during cooking.
Start most cooking operations on a higher setting and then
set to a lower setting to finish cooking.
To operate the triple radiant surface element:
Press
1. Place correctly sized cookware on
the triple surface element.
2. Press and hold the On/Off
for the triple element position
until a beep is heard.
3. Press Element Size to select "_'_"_
S_e
single, double or triple settings.
4. Press Lo, Med (5.0) or Hi.
Each touch of the Lo or Hi pad will
decrease or increase the power
level by 1/2 from 9.5 through 3.0.
Simmer power levels between
3.0 and 1.2 will decrease or increase
by .2 increments. Lo is the lowest
power level available.
5. Once cooking has
completed, press On/Off.
i I
'\ //
iJ
\
Fig. 1
S ze
.......f A
Fig. 2
©
0@
O O
Fig. 3 (single)
©
O O
Fig. 4 (double)
®
Fig. 5 (triple)
ii
iiRadiant surface elements may appear to have cooled
after they have been turned off. The glass surface may
still be hot and burns may occur if the glass surface is
touched before it has cooled sufficiently.
Do not place flammable items such as plastic salt
and pepper shakers, spoon holders or plastic wrappings
on top of the range when it is in use. These items could
melt or ignite. Potholders, towels or wooden spoons
could catch fire if placed too close to the surface
elements.
i Do not allow aluminum foil, or ANY material that
carl melt to make contact with the ceramic glass
cooktop. If these items melt on the cooktop they can
damage the ceramic cooktop.
• Each time a pad is touched a beep will sound. If no
further pads are touched within 10 seconds the
request to power the element ON will clear.
• The power level may be adjusted at any time while the
element is ON. You may switch from either coil size
setting at any time during cooking.
Once the power level is turned OFF the HE indicator
light will remain ON if the cooktop is still hot and will
remain ON until the heating surface area has cooled
sufficiently.
• If no element size is choosen when the Triple element is "
turned ON, the control will default to the inner coil only.
• The size and type of cookware used will influence the
setting needed for the best cooking results. The
simmer settings are used to simmer and keep larger
quantities of foods warm such as stews and soups.
The lower simmer settings are ideal for delicate foods
and melting chocolate or butter.
14
Loading ...
Loading ...
Loading ...