Loading ...
Loading ...
Loading ...
8
CAUTION: Ensure all screws are tight before moving
onto the next step.
STANDARD/ANGLE-MOUNTING INSTRUCTIONS
3. Cut off excess fixture wires, leaving approximately 6 to
9 inches above the top of the downrod assembly (B).
Strip 1/2 inch of insulation from the end of each fixture
wire.
4. Carefully lift the assembly and rest the hanger ba
ll of
downrod assembly (B) on the mounting bracket (A)
attached to the outlet box. Be sure the groove in the
hanger ball is lined up with the tab on the mount
i
ng
bracket (A). This will allow for hands-free wiring.
Proceed to
WIRING on page 9.
DANGER: Be careful when aligning the tab to the slot !
If not fully engaged, there is a possibility of the fan
falling, which may result in serious injury or death.
3
A
4
Hanger Ball
Groove
Tab
6 to 9 in.
Loading ...
Loading ...
Loading ...