Loading ...
Loading ...
Loading ...
F
F
R
I
J
12
FINAL INSTALLATION INSTRUCTIONS
9. Connect the 2 single pin connectors from the LED light
kit (J) to the 2 single pin connectors from motor
assembly(F). Connect the black wire to black wire, and
white wire to white wire.
7. Adjust the switch housing (I) until the screw heads are
aligned with the keyholes, then re-insert mounting
screw (R) previously removed on step 5. Tighten all
mounting screws (R) securely.
7
8. Remove one of the screws (S) on switch housing (I),
then loosen the other two.
8
9
Screw
(remove)
Screws
(loosen only)
Loading ...
Loading ...
Loading ...