Loading ...
Loading ...
Loading ...
FRONT PANEL FACILITIES
REVERSE MODE (REV MODE)
There are three settings:
One way mode 7- position
When this mode is selected by pressing the REV MODE button,
playback or recording is performed on one side of the tape only,
When the tape reaches the end of the side, it stops automatically
(auto stop function),
Two way mode _ position
When this mode is selected by pressing the REV MODE button,
playback or recording can be performed on both sides of the tape.
When the tape reaches the end of the first (forward) side, its direc-
tion is automatically reversed, and playback or recording continues
on the other (reverse) side, When it reaches the end of the reverse
side, the tape steps automatically (auto stop function), If playback or
recording is started from the reverse side, the tape will stop when it
reaches the end of that side,
[ DOLBY NR & DOLBY HX PRO
• Dolby NR Systems
Dolby NR systems are designed to reduce the amount of tape hiss,
mainly in the treble components. During recording, the highpitched
pianissimo sounds which are most characteristic of audible noise are
boosted, and during playback, only these boosted sections are at-
tenuated, so that tape sound is returned to normal. As a result, the
noise is attenuated by an amount equal to the boosting inthe treble
range. The Dolby B-type NR system reduces noise in the treble
range, cutting tape hiss and expanding the dynamic range. The Dolby
C-type NR system is even more effective in reducing noise, as it re-
duces noise from the mid-range on.
NOTE:
When a tape has been recorded using the Dolby B-type or C-type NR
system, the same DOLBY NR system selected for recording must
be selected for playback.
Repeat mode _._ position (RELAYPLAY)
[If a tape is loaded in either DECK I or [l]
Both sides of a tape are played back repeatedly using the auto re-
verse system. When 16 sides of the tape have been played back the
deck stops automatically.
Recording will be performed in the same manner as the two way
mode.
[If both DECK I and II are loaded with tapes]
Relay play will be used for playback (See page 12).
• Dolby HX PRO Headroom Extension System
The DOLBY HX PRO system controls the bias current during record-
ing and maintains it at the optimal level based on the amount of the
high-frequency components in the music signal. It therefore provides
excellent recording quality even when recording signals from digital
sources, which contain a large amount of high-frequency compo-
nents. To guarantee optimal results, the HX PRO system is activated
automatically when recording begins. Since this system controls the
quality of recording itself, the clarity of the sound will be maintained
even when the tapes are played back on another cassette deck
which does not contain the HXPRO Headroom Extension System,
9
<RRB1176>
I:n
Loading ...
Loading ...
Loading ...