Loading ...
IMPORTANT 2
FOR USE IN THE UNITED
KINGDOM
l_w wire _ thfa mm_l hind m _mrmd _
accordan_ wah the foaowi_l oede :
blul _1
brown live
If the plug provided is unsuizadld for your socket out-
lets, the plug must be cut off and a suitable plug fit-
ted
The cut-off plug should be disposed of and must not be
insertad into any 13 amp socket as this can result in Elec-
tric shock. The plug or adaptor or the distribution panel
should be provided with 5 amp fuse. AS the coldurs of
the wires in the mains lead of this appliance may not COL
respond with coioured markings ldent_ying the terminals
in your plug, proceed as follows :
The wire which is coioured blue must be connected to
the terminal which ismarked with the is_ler N or coioured
black¸
The wire which is coloured brown must be connected
to the terminal whioh is marked with the letter L or
coloured red
Do notcorm4_'t_ther wire to the earth terminalof •
three pinplug
NOTE
After redisbing or changing • fuse, the fuse cover in the
plug must be replaced with • fuse cover which Gorre-
spends to the coldur of the insert in the bese ef the plug
or the word that is embossed on the base of the plug,
and the appliance must not be used without a fuse
cover¸ If lost replacement fuse covers can be obtained
from: your Pealer¸
Only 5 A fuses approved by B.SI. or A ST A to 88
1362 should be used
IMPORTANT SAFETY INSTRUCTIONS
READ INSTRUCTIONS -- All the safety and operating
instructions should be read before the product is
opecated
RETAIN INSTRUCTIONS -- The safety and operating
instructions should be retained for future reference¸
HEED WARNINGS -- All warnings on the Weduct and
in the operating instructions should be adhered Io
FOLLOW INSl_UCTIONS w All operating and use
_nstructions should be followed¸
CLEANING m The product shc_ld be cleaned only with
e polishing cloth or a soft dry cloth. Never oleen with
fumlture wax, benzine, insecticides or other volabie
liquids since they may corrode the cabinet.
ATTACHMENTS -- Do not use eflachments not
recommended by the product manofacturer as they
may cause hazards¸
WATER AND MOISTURE -- DO not use this product
near weter m for example, near a bathtub, wash
bowl, kitchen sir)k,or laundrytub;in a wet basement;
or near a swimmLng pool; and the like¸
ACCESSORIES -- DO not place this p_educt on an
unstable cart. stand, tribixL bracket or table. The
product may fall causing serious ldiury to a child or
adult, and serious damage to the product¸ Use only
with • cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with
the product Any mounting of the product should
follow the manefactufer's _nstructions, and should
use a mounting accessory recommended by the
manufacturer.
CART -- A product and cart combination should be
moved with care. Ou_ck stops, excessive force, and
uneven surfaces may cause'the product and cart
combination to overturn.
VIENllLA11ON -- Slots and openings in the cabinet are
provided for ventilation and to ensure rbilabie
operation of the product and to protect it from
overheating, and these openings must not be
blocked or covered¸ The openings should never be
blocked by placldg the product on a bed, sofa, rug,
or other simiisr surface¸ TNS product should not be
placed ina buil_in installation such as a bookcase or
rack unless proper ventilation is provided or the
manufacturer's instructions have been adhered to
POM_R SOURCES m This product should be operated
only from the type of power source indicated on tEe
marking label If you are not sure of the type of
power suPPly to your home, consolt your product
dealer or local power coml_ny
LOCATION - The appliance should be installed in a
stable location¸
NONUSe PERIDIDG - The power corg of the appliance
should be unplugged from the outlet when left un-
used for e long period of t_me
GROUNDING OR POLARIZATION
• If this product isequipped with a polarized alternating
current line plug (a plug having One blade wider than
the othed, itwill fit into the outlet only one way. This
is a safety feature.If yc.J are unabld toinsert the p_ug
fully into the outlet, try ieversing the plug¸ If the plug
should still fai_ to fit. contact your electrlo_ln To
replace your obsolete outlet¸ DO not defeat the
safety purpose of the pola¢ized plug
• If this product is equipped with a three-wire
grounding type plug, e plug having a third (grounding)
pin, itwillooly fit into a grounding typa power outlet
This laa sofety feature Ifyou are unable to insert the
plug into the outlet, contact your electrleisn to
replace your obsolete outlet. Do not defeat the
safety purpose of the grounding type plug¸
POWER-CORD PROTECTION -- Power-supply cords
should be routed so that they are not likely to be
walked on or pir_ched by items placed upon or
against them, paying pertlcular attention to cords at
pings, convenience receptaclds, and the point whore
they exit from the product.
OU1OOOR ANTENNA GROUNDING -- If an outside
entennaorcablesystemlaconnectedtotheproduct.
be sure the antenna Or cable system is grounded so
asto provlde some protection egeinst veflage surges
and built-up static charges Article 810ef the National
Ele:t ncalCode, AN SI/N F PA 70. provipe sirdormatldn
with regard to proper grounding of the mast and
supporting structure, grounding of the leaden wire
to an antenna discharge unit, size of grounding
conductors, location of antennzPdischarge unit,
¢onnectiofl to grounding electrodes, and
requirementsforthegmundingelectrode SeeFigure
A
LIGHTNING D For added protection for this product
during a lightning storm, orwhen itisldft unattended
and unused for long periods of time. unplug it from
the wall outlet and disConnect the antenna or cable
system. This will prevent damage to the product
due to lightning and power*line surges¸
POWER UEIES m An outside antenr_ system should
not beldcatad inthe vicinityof overheed power lines
or other electric light or power circuits, or where it
can fag into such power lines Or circufbi When
installing an outside arttenna system, extreme care
should be taken to keep from touching such power
lines or circuits as contact with them might be fatal.
OVERLOADING m Do not overload waft oupets,
exle nsion cords, or intngralcorlve nience fete ptades
as this can result in a risk of fire or electric shock¸
GROUND
CLAMP
ELECTRIC
SERVICE
Fig.A
OBJECT AND LIQDID ENTRY -- Ne vet push objects of
any kind into this product through openings as they
may touch dangerous voltage points Or short-out
parts that could result in a fire or electric shock¸
Never spill liquid of any kind on the product.
RERVlClNG -- DO not attempt to serv_e this product
yourself as opening or removing covers may expose
you to dangerous w_tage Or other hazards¸ Refer all
SeT_ cing to qualified service personnel
DAMAGE REQUIRING SERVICE -- Un pingthis preduc!
from the waft outlet and refer servicing to qual_fldd
service personnel under the folldw_ng conditions:
• When the power-supply cord or plug is damaged¸
• If liquid has been spilled, or objects have fallen _nto
the product.
• Ifthe preduct has been exposed to rain or water¸
• If the preduet does not operate normally by folldwing
the operating instructions.Adjust o_ly those controls
that are covered by the operating instructions as an
improper adjustment of other controls may result in
damage and will often require extensive work by a
qualrilad technician to restore the product to its
normal operation
• If the product has been dro_pad or damaged in any
way.
• When the product exhibits a distinct change in
pedormance -- this indicates • need for setvise
REPLACEMENT PARTS _ When replacement parts
are required, be sure the set_e technician has used
replacement parts specified by the manufacturer or
have the same characleristios as the original pa_
Unauthorized substitutions may result inere, electric
shock, or other hazards¸
SAFE'W CHECK -- Upon completion of any sewioe or
repairs to this product, ask the service technician to
perform safety checks todefarmlde that the product
is in proper operating condition¸
WALL OR CEILING MOUNTING w The product should
not be mounted to a weft or ceiling
HEAT m The product should be situated away from heat
sou(ces such as radistocs, heat registers, stoves, or
other products {including amplifiers) that produce
heat¸
ANTENNA
f LEAD IN
WIRE
_(NEC SECTION 810-2OI
GROUND{NG CONDUCTORS
(NEC SECllON 810-21)
_"- GROUND CLAMPS
-- POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEe ART 250, PART H)
NEe -- NATIONAL ELECTRICAL CODE
CONDENSATION
When thisunitisbroughtintoa warm room from previouslycoldsurroundingsorwhen the room temperaturerisessharply,condensationmay I
form inside,and theunitmay not be ableto attainitsfullperformance.To preventthis,allowthe unittostandforaboutan hour beforeswitch-
ingiton, or raise the room temperature gradua y.
2
<RRB1176>
Loading ...
Loading ...
Loading ...