Loading ...
Loading ...
Loading ...
I
I TWO MODES COUNTER
Counter Mode button (TIME/COUNT)
Press the button, and 2 modes change alternately.
Tape counter _ Time counter
• Tape counter
Different counters are provided for DECK 1and 1|. The number on
the counters increase/decrease as a tape runs. It is useful if you
make a note of the location and length of a selection while re-
cording or playing back. You can then easily locate a desired se*
lection or where to resume recording.
• Time counter
• This indicates the elapsed time for recording or playback, This
automatically starts counting when recording or pleyback starts.
During fast-forwarding/rewinding, the counter automatically
switches to a tape counter.
• The time counter indicates only the time duration of recording or
playback. When recording or playback is changed to fastforward-
ing, rewinding, or music search, the counter switches from the
time counter to the tape counter. When the operation returns to
recording or playback, the counter switches to the time counter.
• Tape counter indication
I-I I-I I--I I-'1
I_1 I_1 LJ I_1
• Time counter indication
I'_ i'_. I-I N
/_1 /-I. I_l LJ
I
FRONT PANEL FACILITIES i
Counter reset button (RESET)
Press this button to reset the tape counter to 0 o _ 0, or to reset the
time counter to un 0:0 0.
Counter indicator during music search
0Q_ID I Nomral tape counter indicator I
!
Counter indicator during music search
PIP0
Plus sign
PI-O
Minus sign
• A plus sign (+)appearsduring music search in theforward direction.
• A minus sign(-) appears during music searchin the reversedirection.
PLAYBACK
SINGLE PLAYBACK (Either DECK [ or DECK 1[)
1 5 5 1
II
!
3 2
The above illustration shows CT-W616DR.
1. Load a prerecorded tape in DECK [ or 1[.
2. Select the Dolby NR mode with the OOLBY NR button.
• Always set the same Dolby NR system that was used for re-
cording.
3. Select the reverse mode with the REV MODE button
(see page 9).
4. Set the stereo amplifier for tape playback.
5. Pressthe playbeck (_ er <) button of either DECKI er rl.
To improve high frequency sound during playback In
tapes with poor recordings (Except for U.S. model of CT-
W606DRI
Pressthe FLEXbutton and playbackthe tape,
To stop playback temporarily (DECK 1[ only)
Press the pause (11)button.
• To resume playback, either press the pause 111)button again, or
press the playback (_ or <1)button,
The last two digits of the counter indicator show the number of
selections to be skipped. If three selections are to be skipped, for
example, it shows "P+03" initially.The number then decreases by
1 each time a selection is skipped ("P+02" -- "P+01 etc.). When
the deck resumes playback, the normal tape counter reappears,
I
BLANK SKIP
This function allows you to skip unrecorded portions of the tape
during playback
Press the REV MODE button to c-*.__.
NOTE:
• When the REV MODE button is set to the c-.D position, the relay
mode will be selected
• When this mode is selected, ff the tape deck encounters an unre-
corded portion of tape more than 15 seconds in length, it will fast
forward the tape until it encounters another recorded portion, and
resume playback from that point.
11
<RRB1176>
En
To stop playback
Press the stop (11)button.
Select the reverse mode with the REV MODE button to c-'.__,
To fast forward or rewind tape
: Press in stop mode to fast forward the tape on the side which
can be seen through the cassette door (the tape on the invis
ible side isrewound),
414 : Press in stop mode to rewind the tape on the side which can
be seen through the cassette door (the tape on the invisible
side isfast forwarded),
Loading ...
Loading ...
Loading ...