Loading ...
Loading ...
Loading ...
CONNECTIONS
PIONEER SYSTEM REMOTE CONTROL (O) ]
CONTROL IN jack
Use the enclosed Remote Control Cord to connect this jack to the
CONTROL OUT jack of another component which bears the _1 mark
(indicating that it is equipped with PIONEER System Remote Con-
trol). You will then be able to operate this unit using the Pioneer sys-
tem remote control unit. If the remote control unit does not have
separate buttons for deck 1 and deck 1|, or a selection button to
choose deck ! or deck 11,the buttons will only operate deck 11.To
operate deck 1with a remote control unit which was not designed
for double cassette deck, see page 10.
CONTROL OUT jack
Intermediary jack which outputs signals from the CONTROL IN jack
of this unit to the input jack of another unit. Connect this jack to the
CONTROL IN jack of another component compatible with PIONEER
System Remote Control.
NOTE:
Besure to connectbothof the controlcord'splugs securelyto the
CONTROL/N and CONTROLOUTjecks, Do not connectonly one
endof thecable.
I CD.DECK SYNCHRO RECORDING (<_)
• CD.DECK SYNCHRO recording can be carried out when this unit
is connected to a Pioneer CD player equipped with a CD.DECK
SYNCHRO jack.
NOTES:
• Keep the input and output jacks connected between the amplifier
and this unit, otherwise, the CDoDECK SYNCHRO recording can-
not be carried out.
• Even when the CDplayer is connected to the amplifier with an
optical fiber cable, connect the CD player to the amplifier or this
unit with the input and output cords that have pin plugs.
• Do not use any cords other than the supplied accessory cord.
(Use only the supplied accessory cord.)
CONNECTING THE RECORDING AND
PLAYBACK CORDS (_, _))
Left channel White plug
Right channel_ _" _
Red plug
Connect the TAPE jacks of your amplifier to the LINE jacks of the
cassette deck. Be sure to connect the REC (INPUT) jacks of the deck
to the recording (output) jacks of the amplifier, and the PLAY (OUT-
PUT) jacks of the deck to the play (input) jacks of the amplifier.
• Connect the plugs properly:
Left channel - White plug
Right channel - Red plug
I CONNECTING THE POWER CORD (_) I
Insert the power cord of the cassette deck into the accessow AC
outlet of your amplifier, or into a normal household outlet,
6
<RRB1176>
_n
Loading ...
Loading ...
Loading ...