OneBlade
QP6530
OneBla
de
www.philips.com/support/ifu
BC
Manufactured for: Philips Personal Health
a division of Philips North America LLC
P.O. Box 10313, Stamford, CT 06904, USA
This symbol on the product’s nameplate
means it is listed by Underwriters’
Laboratories, Inc.
Norelco is a registered trademark of Philips
North America LLC.
PHILIPS and Philips shield are registered
trademarks of Koninklijke Philips N.V.
©2020 Philips North America LLC. All rights
reserved.
4222.002.9315.1 (10/13/2020)
2
3
4
5
6
7
8
9
10
11
12
0.5
1
2.5
3.5
4.5
1.5
2
3
4
5
7
9
13
14
21
15
16
17
1
2
18
19
20
21
22
23
24
2
1
25
26
27
>75 % recycled paper
>75 % papier recyclé
English
IMPORTANT
SAFETY
INSTRUCTIONS
When using an electric product, basic
precautions should always be followed,
including the following:
Read all instructions before using this
product.
DANGER
To reduce the risk of electric shock:
-
Do not reach for a corded product that
has fallen into water. Unplug immediately
from the power outlet.
-
Keep the power cord dry.
-
Do not place or store the product where
it can fall or be pulled into a tub or sink.
Do not place or drop the product into
water or other liquid.
-
Except when charging, always unplug
this product from the power outlet
immediately after use.
-
Detach the hand-held part from the
supply cord before cleaning it in water.
-
Plug power cord directly into power
outlet. Do not use an extension cord.
WARNING
To reduce the risk of burns, fire, electric
shock, or injury to persons:
-
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision
or instruction concerning use of the
appliance by a person responsible for
their safety.
-
Children should be supervised to ensure
that they do not play with the appliance.
-
Use this product only for its intended
household use as described in this
manual. Do not use attachments not
recommended by Philips North America
LLC.
-
Never operate this product if it has a
damaged power cord, if it is not working
properly, after it has been dropped or
damaged, or after the product or power
cord has been dropped into water. For
assistance call 1-800-243-3050.
-
Keep the product, cord, charging plug
and any attachments away from heated
surfaces.
-
Never drop or insert any object into any
opening.
-
Do not use the power cord in or near a
power outlet that contains an electric air
freshener to prevent damage to the
power cord.
-
Do not use product outdoors or operate
where aerosol (spray) products are being
used or where oxygen is being
administered.
-
Always check cutters, cutting unit and
guards before using the product. Do not
use the product if cutters, cutting unit or
guards are damaged, as injury may occur.
2
3
4
5
10
9
8
7
6
1
11
1
-
Always attach power cord to product
first, then to power outlet. To disconnect,
set all controls to 'off' position. Then
remove power cord from power outlet.
-
Unplug power cord before plugging in or
unplugging the product.
-
Only use the power cord and other
accessories supplied with the product.
-
Do not attempt to open the product to
remove or replace the built-in
rechargeable battery.
-
The batteries used in this product may
present a fire or chemical burn hazard if
mistreated. Do not disassemble, heat
above 100°C (212°F) or incinerate.
IMPORTANT: The power plug contains a
transformer. Do not cut off the power plug
to replace it with another plug as this will
cause a hazardous condition.
SAVE THESE
INSTRUCTIONS
Introduction
Congratulations on your purchase and
welcome to Philips Norelco!
To fully benefit from the support that
Philips Norelco offers, register your product
at www.philips.com/register.
General description (Fig. 1)
1 Protection cap
2 Blade
3 Blade release slide switch
4 On/off button
5 Battery charge indicator
6 Extra blade
7 Hair length setting wheel
8 Precision trimming comb
9 Power plug
10 Small plug
11 Socket for small plug
This symbol indicates that the product can
be used in the bath or shower.
The display
Battery low
-
When the battery is almost empty, the
bottom light of the battery charge
indicator starts flashing orange (Fig. 3).
Charging
-
When the product is charging, the
bottom charging light starts flashing
white, then the next one and so on (Fig.
4).
Battery full
-
When the product is fully charged, all
battery charge indicators light up white.
Remaining battery charge
-
The remaining battery charge is indicated
by the lights of the battery charge
indicator that light up continuously.
Charging
Charging takes approx. 1 hour.
-
Charge the product before first use and
when the display indicates that the
battery is almost empty.
-
Charging or using the product at
temperatures below 40°F (4.5°C) or
higher than 95°F (35°C) adversely
affects the lifespan of the battery.
-
If the product is subjected to a major
change in temperature, pressure or
humidity, let the product acclimatize for
30 minutes before using.
Quick charge: During quick charge, all three
lights of the battery charge indicator light
up. After approx. 5 minutes of charging, the
product contains enough energy for 5
minutes of use. When quick charge is
finished, the bottom light of the battery
charge indicator starts to flash.
Charging with the power cord
1 Make sure the product is switched off.
2 Insert the small plug into the product and
put the power plug in any 120V AC outlet
(Fig. 5).
3 After charging, remove the power plug
from the wall outlet and pull the small
plug out of the product.
Note: Approx. 30 minutes after the
battery is fully charged or when you
disconnect the product from the outlet,
the battery charge indicator switches off
automatically.
Running time
When the product is fully charged, it has a
cordless running time up to 90 minutes.
Using the product
Note: This product is for cordless use only
(Fig. 6).
-
Use this product for its intended
household use as described in this
manual.
-
For hygienic reasons, the product should
only be used by one person.
-
Trimming is easier when the skin and hair
are dry.
-
Use the product to trim, edge or shave
facial hair (beard, mustache and
sideburns).
-
Trim with the trimming comb to obtain a
certain length.
-
Take your time when you first start to use
the product. You have to gain practice
with the product.
-
Allow some time for the skin to adjust to
the product.
-
Use the blade on a clean face. The
blades go blunt faster if on skin that isn't
clean.
-
Do not use the blade when damaged or
broken. Replace the blade immediately if
it is damaged.
This product is not intended for shaving,
edging or trimming hairs on lower body
parts or scalp hair.
Switching the product on and off
1 Press the on/off button once to switch
the product on or off (Fig. 7).
Shaving
-
Shave off any length of hair. The product
does not shave as close as a traditional
blade so your skin will stay comfortable.
-
Make sure that the blade is in full contact
with the skin by placing it flat on the skin.
-
For the best result, move the product
against the grain.
-
Make long strokes while pressing lightly.
-
Use the product dry or wet with gel or
foam, even in the shower.
-
Shaving a clean beard and face gives the
best results.
1 Switch on the product (Fig. 7).
2 Place the blade on the skin and move
the product upwards or against the grain
in long strokes while pressing lightly (Fig.
8).
Note: Make sure you hold the surface of
the blade flat against your skin (Fig. 9).
3 Switch off and clean the product after
each use (see 'Cleaning').
Edging
-
Use both edges of the blade to create
sharp lines and perfect edges.
-
Hold the product in such a way that the
blade is perpendicular to the skin and
one of its edges touches the skin. This
allows more precise detailing of
sideburns and the area around the
mouth and nose.
1 To create sharp edges and lines, you can
use either edge of the blade (Fig. 10).
2 Switch on the product (Fig. 7).
3 Place the edge of the blade
perpendicular onto the skin (Fig. 11).
4 Make straight strokes while applying
gentle pressure (Fig. 12).
5 Switch off and clean the product after
each use (see 'Cleaning').
Using the precision trimming comb
-
The precision trimming comb allows you
to trim hair to different lengths. When
you trim for the first time, start at the
highest length setting to familiarize
yourself with the product.
-
The settings on the wheel correspond to
the remaining hair length after trimming
in millimeters. You can select a length
from 0.5 mm (1/64 in.) to 9 mm (23/64 in.)
(Fig. 13).
-
Always trim in the direction of the teeth
of the precision trimming comb, making
sure that the flat part of the comb is in
full contact with the skin for an even
trimming result (Fig. 14).
-
Since all hairs do not grow in the same
direction, you may want to try different
trimming directions (i.e. upwards,
downwards, or across). Practice is best
for optimum results.
-
Make sure to always move the product
against the grain.
-
Trimming is easier when the skin and hair
are dry.
1 Place the front part of the comb onto the
blade and push the projection at the
back of the comb into the product (‘click’)
(Fig. 15).
2 Turn the hair length setting wheel to
select the desired hair length setting (Fig.
16). The settings on the wheel
correspond to the remaining hair length
after trimming.
3 Switch on the product (Fig. 7).
4 Place the comb onto the skin and move
the product upwards slowly, against the
grain (Fig. 17).
5 Switch off and clean the product after
each use (see 'Cleaning').
6 To remove the comb, pull the back part
off the product and then slide the comb
off the blade (Fig. 18).
Cleaning
Clean the product after every use.
Never use scouring pads, abrasive cleaning
agents or aggressive liquids such as
gasoline or acetone to clean the product.
Do not tap the product or blade against a
surface to remove hairs and water as this
may cause damage to the product and
blade (Fig. 20). If the blade is damaged,
replace immediately.
Never dry the blade with a towel or tissue,
as this may cause damage.
Cleaning the product
1 Switch off the product.
2 Remove the comb from the blade (Fig.
18).
3 Blow off any hairs that have accumulated
on the blade and/or comb (Fig. 19).
4 Switch on the product approx. 15
seconds and rinse the blade with
lukewarm water (Fig. 19).
5 Rinse the comb for approx. 15 seconds
with lukewarm water (Fig. 21).
6 Carefully shake off excess water and let
all parts air dry completely.
Note: The blade is fragile. Handle it
carefully. Replace the blade immediately if
it is damaged.
This product has no other user-serviceable
parts. For assistance call 1-800-243-3050.
Storage
Always put the protection cap on the blade
to protect the blade from damage during
travel or storage.
We advise you to let the product and its
attachments dry completely before you
store them for the next use.
1 Place the protection cap onto the edge
of the blade (Fig. 22).
2 Close the protection cap (Fig. 23).
-
Charge the battery before storing the
product for an extended period.
-
Be sure the product is switched off.
Remove the power cord from power
outlet and the product before storing it in
a safe, dry location where it will not be
crushed, banged, or subject to damage.
-
Do not wrap cord around the product
when storing.
-
Store cord and other accessories in a
safe location where these will not be cut
or damaged.
-
Do not place or store the product where
it can fall or be pulled into a tub or sink,
water or other liquid while plugged in.
Replacement
Blade wear indicator
For optimal cutting and gliding
performance, replace the blade every 4
months or when it no longer provides the
shaving or trimming results you expect. This
advice is based on two full shaves a week
and actual results may vary.
The blade is equipped with a blade wear
indicator. A green bar will gradually appear
on the blade as you use it (Fig. 24). When it
is highly visible, it is recommended to
replace your blade for the best OneBlade
experience. Replace the blade when you
are not satisfied with its performance.
Always replace with an original Philips
Norelco blade (see 'Accessories').
Depending on your usage behavior, the
exact lifetime of the blade could be longer
or shorter. Similar to a manual blade, the
blade becomes blunt over time, which
results in increased hair pulling and reduced
cutting performance.
Replacing the blade
1 Make sure that the product is switched
off.
2 Carefully push the blade release slide
switch upwards while holding the blade
on both sides (Fig. 25). This prevents the
blade from being ejected from the
handle.
3 Hold the new blade on both sides and
press it onto the handle (‘click’) (Fig. 26).
Note: Be careful, the edges of the blade are
sharp. When you hear a click, the new blade
is placed correctly and ready for use.
Accessories
Replacement parts and accessories may be
purchased at a store near you or on our
website www.philips.com/store.
The following accessories are available:
-
Model QP210 Philips Norelco
Replacement Blade, 1-Pack
-
Model QP220 Philips Norelco
Replacement Blade, 2-Pack
-
Model QP230 Philips Norelco
Replacement Blade, 3-Pack
-
Model QP610 Philips Norelco Body Kit
-
Model QP620 Philips Norelco Face +
Body Kit
Assistance
For assistance, visit our website:
www.philips.com/support or call toll free
1-800-243-3050.
Online information is available 24 hours a
day, 7 days a week.
Disposal
-
This product contains a rechargeable
lithium-ion battery which must be
disposed of properly (Fig. 27). Contact
your local town or city officials for battery
disposal information. You can also call
1-800-822-8837 or visit
www.call2recycle.org for battery drop-
off locations.
-
For assistance, visit our website
www.philips.com/support or call
1-800-243-3050 toll free.
-
Your product is designed and
manufactured with high quality materials
and components, which can be recycled
and reused. For recycling information,
please contact your local waste
management facilities or visit
www.recycle.philips.com
Full Two-Year Warranty
Philips North America LLC warrants this new
product (except blade and comb) against
defects in materials or workmanship for a
period of two years from the date of
purchase, and agrees to repair or replace
any defective product without charge.
IMPORTANT: This warranty does not cover
damage resulting from accident, misuse or
abuse, lack of reasonable care, the affixing
of any attachment not provided with the
product or loss of parts or subjecting the
product to any but the specified voltage or
batteries.*
NO RESPONSIBILITY IS ASSUMED FOR
ANY SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES.
In order to obtain warranty service, simply
go to www.philips.com/support for
assistance. It is suggested that for your
protection you return shipments of product
by insured mail, insurance prepaid. Damage
occurring during shipment is not covered by
this warranty.
NOTE: No other warranty, written or oral, is
authorized by Philips North America LLC.
This warranty gives you specific legal rights,
and you may also have other rights which
vary from state to state. Some states do not
allow the exclusion or limitation of
incidental or consequential damages, so the
above exclusion and limitations may not
apply to you.
*Read enclosed instructions carefully.
45-DAY MONEY-BACK GUARANTEE
If you are not fully satisfied with your
product send the product back and we’ll
refund you the full purchase price.
The product must be shipped prepaid by
insured mail, insurance prepaid, have the
original sales receipt, indicating purchase
price and date of purchase, and the
money-back guarantee return
authorization form enclosed.
We cannot be responsible for lost mail.
The product must be postmarked no later
than 45 days after the date of purchase.
Philips reserves the right to verify the
purchase price of the product and limit
refunds not to exceed suggested retail
price.
To obtain the money-back guarantee
service, please go to
www.PhilipsMoneyBack.com and follow
the simple 3-step process.
Delivery of refund check will occur 6–8
weeks after receipt of returned product.
