User Manual Philips QP2530/30 OneBlade Rechargeable

Using Philips OneBlade corded
For safety reasons, the OneBlade is designed to only work cordless.
This is because the Philips OneBlade can be used for both wet and dry shaving. Using it with water while connected to electricity can be very dangerous. To avoid any risks, the appliance does not work while it is connected to a power outlet.
Also keep in mind that the adapter for OneBlade is not waterproof. Hence, while charging your OneBlade, make sure that you keep it and its adapter away from water or any wet surface.

Philips OneBlade can be used effectively on both wet and dry skin. It can be used with shaving gel or foam and also in the shower.

Charging indications for Philips OneBlade
Some Philips OneBlade models have a charging indicator on the front of the device.
1. When the OneBlade is running out of battery, this indicator flashes orange.
2. When the OneBlade is charging, the indicator flashes green.
3. When the OneBlade is fully charged, the indicator lights up green continuously for approximately 30 minutes.

Cleaning instructions for Philips OneBlade
1. After each use, blow off any hair accumulated on your OneBlade.
2. Turn on your OneBlade and rinse it with some lukewarm water.
3. If the attachments need further cleaning, turn your OneBlade off, take off the attachments and wash them separately.
4. Allow the attachments to air-dry. Do not dry the blade with a towel or tissue and do not tap it against the sink or a hard surface, as these actions can damage your blade.