CMXGTAMDSS27 Operator’s Manual

Loading ...

SPECIFICATIONS*

* All specications are based on the latest product information available at the time of printing. We

reserve the right to make changes at any time without notice.

Canada: This spark ignition system complies with Canadian ICES-002.

ASSEMBLY

INSTALLING THE CUTTING HEAD SHIELD

(For curved-shaft units)

1. Remove the wing nut and washer from the cutting head shield.

2. Insert the short tab (the one without a hole) on the mount bracket into the slot on the cutting head

shield (Fig. 1).

3. Rotate the cutting head shield counterclockwise to align the hole on the cutting head shield with

the hole on the mount bracket (Fig. 1).

4. Insert the square bolt into the hole underneath the cutting head shield (Fig. 2). Push the square

bolt through the cutting head shield and mount bracket.

5. Place the washer onto the square bolt (Fig. 2).

6. Screw the wing nut onto the square bolt until the cutting head shield is rmly in place (Fig. 2).

WARNING: To prevent serious personal injury, never operate the unit without the

cutting head shield in place.

Engine Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Air-Cooled, 2-Cycle

Displacement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 cc (1.64 cu. in.)

Spark Plug Gap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.025 in. (0.635 mm)

Spark Plug (USA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Champion® RDJ7J or Equivalent Plug

Spark Plug (Canada). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Champion® QDJ7J or Equivalent Plug

Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fuel/Oil Mixture

Fuel/Oil Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50:1

Fuel Tank Capacity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.5 . oz. (399 ml)

Approximate Unit Weight (No Fuel) (Varies by Model). . . . . . . . . . . . . . . . . . . . . . . 11.5 - 13.5 lbs. (5.2 - 6.1 kg)

Trimmer Mechanism (Varies by Model) . . . . . . . . . . . . . . . . . . . . . . . . Bump Head or Fixed-Line Cutting Head

Trimming Line Diameter (Bump Head) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.095 in. (2.41 mm)

Trimming Line (Fixed-Line Cutting Head). . . . . . . . 0.095 in. (2.41 mm) or 0.105 in. (2.67 mm) Pre-Cut Line

Cutting Path Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 - 18 in. (43.2 - 45.7 cm)

Loading ...

Operator’s Manual - Page 12