Loading ...
Loading ...
Loading ...
29
11. Push down on the clip on the electrode bracket.
12. Replace oven bake burner electrode inside bracket.
13. Reinstall the oven bake burner and oven bake burner screws.
See Step 5 for illustration.
Replace Oven Bake Burner Cover
1. Align rear shoulder screw mounting holes (keyholes) on the
oven bake burner cover with shoulder screws in the bottom of
the oven.
2. Drop cover and slide to left or right to slide shoulder screws
into narrow ends of keyholes, and lock into place.
A
B
A. Oven bake burner electrode bracket
B. Electrode bracket clip
A
B
A. Oven bake burner electrode
B. Oven bake burner electrode bracket
B
A
A. Shoulder screw mounting holes (keyholes)
B. Shoulder screws
A
A. Bake burner cover
Complete Installation
1. Refer to the “Make Gas Connection” section for properly
connecting the range to the gas supply.
2. Refer to the “Electronic Ignition System” section for proper
burner ignition, operation, and burner ame adjustments.
IMPORTANT: You may have to adjust the “LO” setting for
each range burner.
Checking for proper range burner ame is very important.
The small inner cone should have a very distinct blue ame
1/4"(6.4mm) to 1/2" (1.3 cm) long. The outer cone is not as
distinct as the inner cone. Propane gas ames have a slightly
yellow tip.
3. Refer to “Complete Installation” in the “Installation
Instructions” section of this manual to complete this
procedure.
Loading ...
Loading ...
Loading ...