Loading ...
Loading ...
Loading ...
20
VENTED MODELS IMPORTANT!
CHIMNEY DAMPER MUST BE WIDE OPEN! THE FLUE MUST VENT ALL PRODUCTS OF COMBUSTION.
DAMPER AND GLASS DOORS MUST BE FULLY OPEN BEFORE LIGHTING OR BURNING FOR PROPER
VENTILATION AND TO PREVENT HEAT DAMAGE TO VALVE.
ALL APPLICATIONS - IMPORTANT INFORMATION
• This appliance is equipped with a Safety Pilot System designed to shut itself off if enough fresh air is not available.
Additional ventilation may be optained by opening a window or a door to another room.
• Matches, paper, garbage, or any other foreign material MUST NOT be thrown on top of burner medium or into
the flames.
• Avoid contact with the burner, burner medium, grate or any other part which may be hot.
• Always ensure that the fireplace screen is closed when the appliance is operating.
NOTE: Any beeping or unexpected shutdown may be the over-temperature safety feature in the receiver. If this
happens, move the receiver into a cooler area, and/or use the RH3 remote house (Figure B Above).
REMOTE RECEIVER PLACEMENT (“-SE AND “-RE” MODELS)
FIGURE 32
A) Remote Receiver
for “RE” and “SE”
Models
B)
The Remote Receiver (-RE and -SE models) can be adversely affected by heat and must be placed as far forward and
to the side of your ALTERNA™ as possible (Figure 31A). Our optional Ceramic Remote House accessory (Figure
31B, Item “RH3”), offers heat protection for the Remote Receiver while being pleasing to the eye (remove plastic heat
shield form receiver before placing inside remote house). When connecting receiver to Motor drive (“-RE” models) or
Solenoid (“SE models) be sure to match red and black connectors, red to red and black to black).
Remote Receiver
in Remote House
(RH3)
Loading ...
Loading ...
Loading ...