Loading ...
Loading ...
Loading ...
10
FIRESHAPES PLACEMENT FOR DF-AFG30
PY4-44
FB-4
CU-44
CO-63
CY-63
CO-55
CO-63
CY-63
CO-55
PY4-44
CU-44
FB-4
CU-44
CO-63
FB-4
PY4-44
CO-55
CY-63
PY4-44
FB-4
CO-63
CU-44
CY-63 CO-55
CO-55
PY4-44
CY-63
Place FireShapes into their respective locator holes on the ALTERNA in the order shown below beginning from left to
right. The four sided Pyramid (PY4-44) will fit into the first hole on the left side at a slight angle leaning forward and to
the right (Figure 10). The Fireball (FB-4) will fit into the next hole with the tapered end facing down (Figure 8). Next,
place the Cube (CU-44) into the third locator hole with the rear right corner resting on the edge of the burner allowing
it to lean slightly forward into the locator hole (Figure 9). Now, place the flat topped Cone (CO-63) into the next hole
resting on it’s side (Figures 8 and 9). The Cylinder (CY-63 ) will fit into the 2nd hole from the right at a slight angle
resting against the Flame Rod (Figures 8, 9 and 10). Last, place the second Cone (CO-55) into the first locator hole on
the right leaning slightly forward into locator hole (Figure 10). Duplicate placement for opposite side.
FIGURE 8
(Face)
FIGURE 9
(Top View)
FIGURE 10
(Left Side)
Flame Rods
Loading ...
Loading ...
Loading ...