Loading ...
Loading ...
Loading ...
12
FIRESHAPES PLACEMENT FOR DF-AFG20
Place FireShapes into their respective locator holes on the ALTERNA in the order shown below beginning from left to
right. The four sided Pyramid (PY4-44) will fit into the first hole on the left side at a slight angle leaning forward and to the
right (Figures 14 and 16). Next, place the Cube (CU-44) into the third locator hole with the rear right corner resting on the
edge of the burner allowing it to lean slightly forward into the locator hole (Figure 15). The Fireball (FB-4) will fit into the
next hole with the tapered end facing down (Figure 14). Last, place the Cylinder (CY-63 ) into the 1st hole on the right at
a slight angle resting against the Flame Rod (Figures 15 and 16). Duplicate placement for opposite side.
PY4-44
FB-4
CU-44
CY-63
PY4-44
FB-4
CU-44
CY-63
PY4-44
FB-4
CU-44
CY-63
PY4-44
CY-63
WARNING: Failure to position the parts in accordance with these diagrams or failure to use only parts specifically
approved with this heater may result in property damage or personal injury.
FIGURE 14
(Face)
FIGURE 15
(Top View)
FIGURE 16
(Right Side)
Flame Rods
Loading ...
Loading ...
Loading ...