Loading ...
FULL ONE YEAR WARRANTY ON CRAFTSMAN
SAW CHAIN SHARPENER _ --_._
For one year from the date of purchase, Sears will reptace this Crafts-
man Saw Chain Sharpener, free of charge, if it falls to work properly_
WARRANTY SERVICE IS AVAILABLE BY RETURNING THE
CRAFTSMAN SAW CHAIN SHARPENER TO THE NEAREST SEARS
STORE IN THE UNITED STATES
This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state.
SEARS, ROEBUCK & COo
SEARS TOWER
DEPT. 6981731A
CHICAGO, IL 60684
INTRODUCTION
WE SUGGEST YOU TAKE A FEW MINUTES TO READ THE INSTRUCTIONS CONTAINED IN THIS MANUAL
BEFORE USING YOUR CRAFTSMAN SAW CHAIN SHARPENER THIS WILL HELP YOU OBTAIN THE FULL
BENEFITS OF THE QUALITY AND CONVENIENCE BUILT INTO THE TOOL
RULES FOR SAFE OPERATION
WARNING
When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric
shock, and personal injury, including the following:
READ AND SAVE ALL THE FOLLOWING INSTRUCTIONS
1_ KEEP WORK AREA CLEAN -- Cluttered areas
and benches invite injuries
2 AVOID DANGEROUS ENVIRONMENT -- Don't
expose tools to rain Don't use power tools in damp
or wet Iocations. Don't use power tools in the pres-
ence of flammable liquids or gases. Avoid chemical
or corrosive environments. Keep work area well lit.
3 GUARD AGAINST ELECTRIC SHOCK -- Prevent
body contact with grounded surfaces. For example;
pipes, radiators, ranges, refrigerator enclosures.
4. KEEP CHILDREN AWAY -- Do not let visitors
contact tool or extension cord All visitors should
be kept away from work area_
5. STORE IDLE TOOLS -- When not tn use, tools
should be stored in dry, and high or locked-up place-
out of reach of children_
6. DON'T FORCE TOOL _ it will do the job better
and safer at the rate for which it was intended.
7. USE RIGHT TOOL -_. Don't force small tool or
attachment to do the job of a heavy-duty tool Don't
use tool for purpose not intended - for example -
don't use circular saw for cutting tree limbs or logs.
8 DRESS PROPERLY _ Do not wear loose cloth-
ing or jewelry., They can be caught in moving parts.
Non-skid footwear is recommended when working
outdoors_ Wear gloves to prevent cutting your fingers
when ,touching or rotating chain. Wear protective
hair covering to contain long hair.
9. USE SAFETY GLASSES -- Also use face or dust
mask tf cutting operation is dusty.
10. DON'T ABUSE CORD -- Never carry tool by
cord or yank it to disconnect from receptacle Keep
cord from heat, oil, and sharp edges.
11_SECURE WORK _ Use clamps or a vise to hold
work., It's safer than using your hand and it frees both
hands to operate tool
12_ DON'T OVER-REACH -- Keep proper footing
and balance at all times.
13 MAINTAIN TOOLS WITH CARE _ Keep tools
sharp and clean for better and safer performance.
Fotlow instructions for lubricating and changing
accessories. Inspect tool cords periodically and if
damaged, have repaired by authorized service
facility. Inspect extension cords periodically and
replace if damaged_ Keep handles dry, clean, and
free from oil and grease
14. DISCONNECT TOOLS _ When not in use,
before servicing, and when changing accessories,
such as blades, bits, cutters.
15 REMOVE ADJUSTING KEYS AND WRENCHES
Form habit of checking to see that keys and ad-
justing wrenches are removed from tool before
turning it on_
16. AVOID UNINTENTIONAL STARTING _ Don't
carry plugged-in tool with finger on switch_ Be sure
switch is off when plugging ino
17 OUTDOOR USE EXTENSION CORDS _ When
tool is used outdoors, use only extension cords
intended for use outdoors and so marked
18. STAY ALERT _ Watch what you are doing Use
common sense.. Do not operate tool when you are
tired Don't use power tools after taking drugs,
alcohol or medications..
!9,. CHECK FOR DAMAGED PARTS -- Before
further use of the tool, check for damaged parts,
Check for alignment of moving parts, binding of
moving parts, breakage of parts, mounting, and any
other conditions that may affect its operation. A part
that is damaged should be properly repaired or
replaced by an authorized service center before
further use of the tool Have defective switches
replaced by authorized service center. Do not use
tool if switch does not turn it on and off.
PAGE 2
Loading ...
Loading ...
Loading ...