Loading ...
Loading ...
SAFETY RULES
• Never operate the snow thrower near glass en-
closures, automobiles, window wells, drop-
offs, and the like without proper adjustment of
the snow discharge angle. Keep children and
pets away.
® Never operate the snow thrower at high trans-
port speeds on slippery surfaces. Look behind
and use care when backing.
• Never direct discharge at bystanders or allow
anyone in front of the snow thrower.
® Do not run the engine ihdoors, except when
starting the engine and for transporting the
snow thrower in or out of the building. Open the
outside doors; exhaust fumes are dangerous
(containing CARBON MONOXIDE, an ODOR-
LESS and DEADLY GAS).
o Take a!l possible precautions when leaving the
snow thrower unattended° Disengage the
augedimpelter, shift to neutral, stop engine,
and remove key.
® Do not overload the machine capacity by at-
tempting to clear snow at too fast a rate.
SAFE STORAGE
= Always refer to Owner's Manual instructions
for important details if the snow thrower is to be
stored for an extended period_
e Disengage power to the auger/impeller when
snow thrower is transported or not in use°
• Never store the snow thrower with fuel in the
fuel tank inside a building where ignition sources
are present such as hot water and space
heaters, clothes dryers, and the like. Allow the
engine to cool before storing in any enclosure.
REPA1RtADJUSTMENTS SAFETY
o After striking a foreign object, stop the engine
(motor), remove the wire from the spark plug,
disconnect the cord on electric motors, thor-
oughly inspect the snow thrower for any dam-
age, and repair the damage before restarting
and operating the snow thrower.
• If the snow thrower should start to vibrate
abnormally, stop the engine (motor) and check
immediately for the cause. VibratiOn is gener-
ally a warning of trouble°
• Stop the engine (motor) whenever you leave
the operating position, before unc!ogging the
auger/impeller housing or discharge guide,
and when making any repairs, adjustments, or
inspections.
o When cleaning, repairing, or inspecting, make
certain the auger/impeller and all moving parts
have stopped. Disconnect the spark plug wire
and keep the wire away from the plug to
prevent accidental starting_
e Never attempt to make any adjustments while
the engine is run ning (except when specifically
recommended by manufacturer).
• Maintain or replace safety and instruction
labels, as necessary.
• Run the snow thrower a few minutes after
throwing snow to prevent freeze-up of the
auger/impeller.
LOOK FOR THIS SYMBOL TO POINT OUT
IMPORTANT SAFETY PRECAUTIONS. IT
MEANS--ATTENTION!!! BECOME ALERT!!!
YOUR SAFETY IS INVOLVED.
i , nl,i n
3
Loading ...
Loading ...
Loading ...