Loading ...
Loading ...
Loading ...
EN - 15
3. Use [UP] or [DOWN] key to change to lower part (Southern Hemisphere).
4. Press the [WIND] key to conrm and exit.
NOTE:
Changing from hemisphere setting will automatically switch the direction of the moon
phase on the display.
MOON PHASE
In the Northern hemi-
sphere, the moon waxes
(the part of the moon we
see that glows after the
New Moon) from the right.
Hence the sun-lit area
of the moon moves from
right to left in the Northern
Hemisphere, while in the
Southern Hemisphere, it
moves from left to right.
Below is the table which
illustrate how the moon will
appear on the console.
MAINTENANCE
TO CLEAN THE RAIN COLLECTOR
1. Rotate the rain collector by 30° anti-
clockwise.
2. Gently remove the rain collector.
3. Clean and remove any debris or in-
sects.
4. Install all the parts when they are fully
clean and dried.
N
N
N
TO CLEAN THE THERMO/HYGRO SENSOR
1. Unscrew the 2 screws at the bottom of the radiation shield.
2. Gently pull out the shield.
3. Remove carefully any dirt or insects inside the sensor casing (Do not let the sensors
inside get wet).
4. Clean the shield with water and remove any dirt or insects.
5. Install all the parts back when they are fully clean and dried.
New Moon
Waxing Crescent
Waxing Gibbous
Waning Gibbous
First quarter
Full Moon
Third quarter
Waning Crescent
N
N
N
“Lock” Position “Unlock” Position
Northern
hemisphere
Moon Phase
Southern
hemisphere
Loading ...
Loading ...
Loading ...