Sencor SWS 9300 Professional Weather Station

User Manual - Page 15

For SWS 9300.

PDF File Manual, 22 pages, Read Online | Download pdf file

SWS 9300 photo
Loading ...
Loading ...
Loading ...
EN - 14
WIRELESS SIGNAL RECEPTION
The 5-IN-1 sensor is capable of transmitting data wirelessly over an approximate operating
of 150m range (line of sight). Occasionally, due to intermittent physical obstructions or oth-
er environmental interference, the signal may be weaken or lost. In case that the sensor
signal is lost completely, you will need to relocate the Console or the wireless 5-IN-1 sen-
sor.
TEMPERATURE & HUMIDITY
COMFORT INDICATION
The comfort indication is a pictorial indication based on indoor air temperature and humidi-
ty in an attempt to determine comfort level.
NOTE:
- Comfort indication can vary under the same temperature, depending on the humidity.
- here is no comfort Indication when temperature is below 0°C (32°F) or over 60°C
(140°F).
DATA CLEARING
During installation of the wireless 5-IN-1 sensor, the sensors were likely to be triggered, re-
sulting in erroneous rainfall and wind measurements. After the installation, user may clear
out all the erroneous data from the Console, without needing to reset the clock and re-es-
tablish pairing. Simply press and hold the [HISTORY] key for 8 seconds. This will clear out
any data recorded before.
BACKLIGHT
The main unit backlight can be adjust, using the [HI / LO / AUTO] sliding switch to select
the appropriate brightness:
- Slide to the [HI] position for the brighter backlight.
- Slide to the [LO] position for the dimmer backlight.
- Slide to the [AUTO] position for the auto adjust backlight that according to environment
light level.
POINTING 5-IN-1 SENSOR TO THE SOUTH
The outdoor 5-IN-1 sensor is calibrated to be
pointing to North by default. However, in some
cases, users may wish to install the product
with the arrow pointing towards the South:
1. First install the outdoor 5-IN-1 sensor with
its arrow pointing to the South.
2. On the Console, press and hold the
[WIND] key for 8 seconds until the upper
part (Northern Hemisphere) of the com-
pass lights up and blinking.
No sensor Signal searching Strong signal Weak signal Signal lost
Too cold Comfortable Too hot
Northern hemisphere Southern hemisphere
Loading ...
Loading ...
Loading ...