4. Style #1: Tuck the electrical
wires into the electrical box
and position the “key slots”
over the support screws. Turn
and lock the support screws
into the “key slots”. Tighten the
support screws into place.
Style #2: Install the pan
through the centre screw stud.
Secure the pan using a lock
washer and hex nut.
5. Install the proper bulb type
and wattage (not included).
6. Note: Refer to the style of
assembly that matches the
style of your fixture.
Style #1: Secure the glass in
place using the decorative cap,
hex nut, fibre washer and finial.
Style #2: Secure the glass in
place using the fiber washer,
hex nut and button.
Style #3: Attach the glass
shade to the fixture using the
thumb screws (tighten with
fingers only).
NOTE: This product will be
style #1 or #2 but you don’t
have the option of both.
1. Style #1: Install the
mounting bracket to the
electrical box using two
electrical box screws (not
included). (Note: Do not adjust
the two support screws at this
time.)
Style #2: Attach mounting
bracket to wiring box with
wiring box screws.
Note: Your fixture may have
either one or two sockets
depending on the model.
2. Style #1: Attach the stem
to the fixture using a lock
washer and hex nut.
Style #2: Secure the centre
stem onto the screw stud.
3. Connect the ground wires
(bare copper or green) from
your fixture to the ground wire
(bare copper or green) or
ground screw in the electrical
outlet box. Connect the black
wire (or wire with marking)
from the fixture to the black
wire in the electrical box and
connect the white wire from
the fixture to the white wire in
the electrical box.
Imported By: CANARM LTD., 2157 Parkedale Ave., Brockville, Ontario, K6V 5V6, Tel: (613) 342-5424, Fax: (613) 342-8437
Electrical
Box
Washer
Lock
Fixture
Socket
Hex Nut
Stem
Key Slots
Fixture
Fixture
Finial
Hex
Nut
Cap
Decorative
Washer
Button
Glass
Glass
STYLE #1
STYLE #2
FM-1
09/10
Fixture
Thumb
Screws
STYLE#3
Hex
Nut
Fibre
Washer
INSTALLATION:
QUESTIONS OR CONCERNS CONTACT CANARM AT:
1-800-265-1833 (English) / 1-800-567-2513 (French)
Monday through Friday 8:00 AM to 5:00 PM E.S.T.
TOOLS AND MATERIALS REQUIRED:
SAFETY PRECAUTIONS:
Phillips
Screwdriver
Wire Cutters
Wiring supplies
as required by
electrical code
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
DO NOT REMOVE INSULATION FROM FIXTURE.
2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE
BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE
HAZARDS INVOLVED.
3. CAUTION – RISK OF FIRE. CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT
CONDUCTOR.
4. CONNECT THE GROUND WIRES (BARE COPPER OR GREEN) FROM YOUR FIXTURE TO THE GROUND
WIRE (BARE COPPER OR GREEN) OR GROUND SCREW IN THE ELECTRICAL OUTLET BOX.
NOTE: Product May Not Look Exactly As Shown In Figures.
Note: Your fixture may have either one or two sockets depending on the model.
Pliers Wrench
L
I
G
H
T
I
N
G
&
F
A
N
S
E
C
L
A
I
R
A
G
E
S
&
V
E
N
T
I
L
A
T
E
U
R
S
CEILING LIGHT
STYLE #1
STYLE #2
STYLE #1
Fixture
Socket
Stem
Fixture
STYLE #2
Washer
Lock
Socket
Hex Nut
Fixture
STYLE #1
STYLE #2
!
“INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS”
“READ ALL INSTRUCTIONS”
“IMPORTANT SAFETY
INSTRUCTIONS”
“SAVE THESE INSTRUCTIONS”
White
Black
House supply
Ground wire
Fixture
Ground wire
