Loading ...
Loading ...
Loading ...
END-OF-CYCLE SIGNAL CONTROL SOFT-HEAT_"_SYSTEM
Your dryer sounds a signal when
a drying cycle is finished.
The signal is helpful when you are
drying permanent press, synthetics,
and other items. These items should
be removed from the dryer as soon
as it stops in order to prevent wrinkles.
• On some models, the volume of the
signal can be adjusted.
PUSH TO START BUTTON
Use this control to start the dryer.
Be sure the dryer door is closed.
Opening the door stops the dryer, it
will not start again until you close the
door and press the PUSH TO START
Button. Be sure the Cycle Selector
Control (Timer) is still on a dry setting.
SOFT-HEAT _">System guards against
overdrying. This helps your fabrics
retain the natural moisture they need,
prevents static, and reduces pilling -
the formation of small lint-like balls
on the surface of garments. Pilling
is the natural result of washing and
wearing of garments.
Kenmore dryers help prevent overdrying
so you get outstanding fabric care. in
the AUTO DRY and TIMED DRY Cycles,
clothes are dried at the temperature
you selected until the last few minutes
of the cycle. The dryer then switches to
low heat.
COOL DOWN
Approximately ten minutes before the
end of the AUTO DRY and TIMED DRY
Cycles, clothes are tumbled without heat
to help reduce wrinkles and make
clothes more comfortable to handle.
7O
WRINKLE GUARD I TIMED
DRY
30
AUTODRYII
......... TOOCHLESSORY °P
10 20 a0 AIR DRY
Soft H¢_t System
33
Loading ...
Loading ...
Loading ...