Kenmore 10650593000 Elite side-by-side refrigerator

User Manual - Page 7

For 10650593000.

PDF File Manual, 28 pages, Download pdf file

Loading ...
Loading ...
Loading ...
4.
5.
= Carefully lift door up off bottom hinge. Make sure you
protect water line from damage
Remove right top hinge.
= Remove hinge cover screw and hinge cover,
= Remove hinge screws, DO NOT REMOVE SCREW 4 AS
SHOWN IN DIAGRAM,
____--- 1
.._f_._ - 2
6
1_Hinge Cover Screw
2, Hinge Cover
3 Hinge Plate Screws
4 Do not remove this screw
5 Hinge
6 Shfm
m Lift door up off bottom hinge.
Remove bottom hinge, if necessary. Both bottom hinges have
similar construction. DO NOT REMOVE SCREW 1 AS
SHOWN IN DIAGRAM,
NOTE; tt may not be necessary to remove the bottom hinge
to move refrigerator through a doorway.
1
J
6. Replace doors.
Electrical Shock Hazard
Reconnect both ground wires°
Failure to do so can result in death or
electrical shock.
i, iii1,11 iii iii iiiii iii i iiiiiiiiiiiiii
Apply firm pressure with hand on face of trim, S)ide top trim up
and bottom trim down away from hand)e, then lift off of shoulder
screws Remove hand)e screws,
Read all directions carefully before you begin.
IMPORTANT:
If operating the refrigerator before installing the water
connection, turn ice maker to the OFF position to prevent
operation without water
All instaflations must be in accordance with local p(umbing
code requirements,
m Use copper tubing and check for leaks,
, install copper tubing only in areas where temperatures wil!
remain above freezing.
m it may take up to 24 hours for your ice maker to begin
producing ice
Tools required:
Standard screwdriver
m 7,/t6in.rand V=in, open-end wrenches or two adjustab(e
wrenches
_,'_in..nut driver
m V.in, drill bit
= Hand drill or electric drill (properly grounded)
NOTE; Your refrigerator dealer has a kit available with a
V,in (6.35 mm) saddle-type shut-off valve, a union, and copper
tubing. Before purchasing, make sure a saddle-type valve
complies with your local plumbing codes Do not use a piercing-
type or _/_ in. (4.76 mm) saddle valve which reduces water flow
and clogs more easily
7. Reconnect wiring plug and both grounding wires.
8. Replace hinge cover and screws.
9. Plug in refrigerator or reconnect power,.
Loading ...
Loading ...
Loading ...