Kenmore 10650593000 Elite side-by-side refrigerator

User Manual - Page 5

For 10650593000.

PDF File Manual, 28 pages, Download pdf file

Loading ...
Loading ...
Loading ...
INSTALLING YOUR
REFRIGERATOR
Excessive Weight Hazard
Use two or more people to move and install
refrigerator,
Failure to do so can result in back or other injury°
Removing packaging materials
m Remove tape and any labels from your refrigerator before
using (except the model and serial number tabel)
To remove any remaining tape or gkJe, rub the area briskly
with your thumb. Tape or glue residue can also be easily
removed by rubbing a small amount of iiquid dish soap over
the adhesive with your fingers Wipe with warm water and
dry.
= Do not use sharp instruments, rubbing alcohol, flammable
fluids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your refrigerator. For
more information, see the "Refrigerator Safety" section
IMPORTANT; Do not remove any permanent instruction labeis
inside your refrigerator, or the Tech Sheet that is fastened to the
base grilfe_
HHrrl i i ill IH.IHH,,, , '"'""'"m I
When Moving Your Refrigerator:
Your refrigerator is heavy_ When moving the refriger-
ator for cleaning or service, be sure to protect
the floor.
Always pull the refrigerator straight out when moving it.
Do not wiggle or "wa]k" the refrigerator when trying to
move it, as floor damage could occur°
IIIHI IHNHIII, HH,II._
Cleaning before use
After you remove all of the packaging materials, clean the inside
of your refrigerator before using iL See the cleanlng instructions
in the "Caring for Your Refrigerator" section.
IIIH iiii HIH.I
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from refrigerator,
Failure to do so can result in death, explosion,
or fire,
To ensure proper venfilation for your refrigerator, allow for
o5in (125 cm) space on each side and at the top
_5" (1.25 cm)
2' (50S cm)/
If your refrigerator has an ice maker, make sure you reave
some extra space at the back for the water line connections.
The refrigerator can be flush against the back watl if you do
not have an ice maker installed,
== [f you are installing your refrigerator next to a fixed wall, leave
2 in. (5.08 cm) minimum on each side (depending on your
model) to al!ow for the door to swing open
NOTE: Do not instatl the refrigerator near an oven, radiator, or
other heat source, nor in a location where the temperature wifl falf
below 55°F (13°(3).
_]
Loading ...
Loading ...
Loading ...