Loading ...
Loading ...
Loading ...
Operation
25
24
Operation
Operating the Dishwasher
Delay Start Button
This option enables you to start the selected program with
a delay of .5 to 9.5 hours.
• Delay time is adjusted by pressing the Time Delay
button (press several times).
• After adjusting the delay time, press the Start/Pause/Cancel
button.
• Close the door. At the end of the delay set, the program
starts automatically.
NOTICE
During a wash program, the Delay Start option does not function.
Operating the Dishwasher
Cancellation of a Function
To cancel a program while the dishwasher is running:
• Open the door gently.
• Press and hold Start/Pause/Cancel button for 3 seconds. The
indicator light will start flashing.
• Close the door.
• The dishwasher will drain the water inside the machine for 2
minutes. At the end of the cycle, a beep will sound. You can choose
and start a new program.
Program Change
To change the program selection while the dishwasher is running:
• Open the door gently.
• Press Start/Pause/Cancel and select a new program.
• Press Start/Pause/Cancel again, to start.
WARNING
Depending on the stage of the program you have cancelled, there may
be detergent residue or rinse agent inside the machine and on the
dishes. Make sure the items in the dishwasher are not used before
washing properly. Ingestion or inhalation of detergent or rinse agent
may cause serious injury. Avoid contact with skin and eyes and keep
children and people in poor health away from these materials.
WARNING
Depending on the length of the terminated program, detergent and
rinse agent may still be in the dispensers. Ingestion or inhalation of
detergent or rinse agent may cause serious injury. Avoid contact with
skin and eyes, and keep children and people in poor health away from
these materials.
Remaining Time Indicator/Delay Time Indicator
You can follow the remaining program duration from the
time indicator display.
Changing Volume of Sound Indicator
Press and hold Function button for 5 seconds until S:03 appears on
the display. Every time you press the Function button, the warning
sound level will change as - - Off, S:01 Low, S:02 Medium, and S:03
High. After selecting the sound volume, wait for 10 seconds to save it.
Factory setting of your machine is S:03.
Loading ...
Loading ...
Loading ...