Viking FDW300 24"W. Custom Panel 3 Series Built-In Dishwasher

Use & Care Manual - Page 23

For FDW300. Series: 3 Series

PDF File Manual, 48 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
Operation
23
22
Operation
Operating the Dishwasher
CAUTION
Avoid opening the door during the wash cycle. This interrupts the
washing process, and hot steam will escape. Hot steam can cause
burns and other serious injuries. When the door is closed, the program
will continue.
Function Buttons
The combination of high temperatures and dishwasher detergent may
cause damage to some items if they are washed in the dishwasher.
Remember, if there is any doubt about any aspect concerning items to
be washed in the dishwasher, follow the instructions from the
manufacturer of the items, or wash the items by hand.
On/Off Button
Turn the dishwasher on with the On/Off button. When turning
on, the icon on the display of the last used program will light
up.
Program Selection Button
Use the Program Selection button to select the desired
program. The icon of the corresponding program will light up.
Refer to “Table of Program Data and average Consumption
Values” to select a program suitable for your dishes. select the
desired program with Program Selection button.
Function
Use the function button to select Half Load, Tablet Detergent,
and Sanitize Functions.
Half Load/Tablet Detergent Button
Half Load/Tablet Detergent button allows you to turn on and
off the Half Load and Tablet Detergent functions of your
machine.
Half Load Function
If you want to run your machine without loading it completely,
place your dishes into the machine as you desire. Press On/Off
button to turn on your machine. Press the Half Load/Tablet
Detergent button after selecting the desired program until Half
Load Indicator lights up, then press Start/Pause/Cancel button
and close the door of your machine. With the Half Load option
you can use every part of your lower and upper baskets and
save water and energy.
on
o
PP
Operating the Dishwasher
Tablet Detergent Function
Depending on the hardness level of the tap water, the Tablet Detergent
function allows obtaining a better drying performance from the multi-
purpose detergents such as 2in1, 3in1, 4in1, 5in1, etc., called as all-in-
one detergents. Tablet Detergent Indicator lights when the Tablet
Detergent function is selected.
Salt and Rinse agent indicators turn off when this function is activated.
Turn on your machine by pressing the On/Off button to use the Tablet
Detergent function. Press the Function button after selecting the desired
programme until the Tablet Detergent Indicator lights up. Press
Start/Pause/Cancel button and close the door of your machine.
Start/Pause/Cancel Button
Use this button to start the selected program. when the button
is pressed once, the light on the button will turn on.
Stop the program with the Start/Pause/Cancel button.
RESET
3 sec.
F
Sanitize Function
Sanitize function raises the water temperature in the final rinse to meet
the requirements of NSF/ANSI STANDARD 184 for Residential
Dishwashers. Certified residential dishwashers are not intended for
licensed food establishments.
Available only with Regular Wash, Pots & Pans, and Pots & Pans Plus
programs.
Turn on your machine by pressing the On/Off button to use the Sanitize
function. Press the Function button after selecting the desired program
until Sanitization indicator lights up. Press Start/Pause/Cancel button
and close the door of your machine.
WARNING
Selected function will remain active in the next washing program. If you
want to use these functions in the new program you have selected, press
the Function button until the indicator of the relevant function turns off.
By using Function button, Half Load, Tablet Detergent and Sanitize
functions can be selected individually.
Loading ...
Loading ...
Loading ...