Loading ...
Loading ...
Loading ...
12 www.dimplex.com
Fireplace Installation
with the wall mounting bracket,
using the appropriate mount-
ing hardware, 13 ¾" (350
mm) below the wall mounting
bracket. (Figure 5)
8. Remove the center back screw
from the bottom of the re-
place. (Figure 6)
9. Hang the replace from the
bracket.
10. Install the removed screw
through the bottom support
bracket into the replace.
11. Refer to Front Glass Installa-
tion section, page 15 for nal
installation procedures.
3. Hold the wall mounting brack-
et, with the bubble level on
the top, on the wall so that the
bubble on the level is centered
between the two black lines.
4. Mark the 3 mounting screw
locations, on the wall, ensur-
ing that the wall bracket stays
level. (Figure 5)
5. In locations where the screws
are being installed only into
drywall, install the supplied
wall anchors before installing
the screw (predrill if required).
6. Secure the wall bracket to the
wall using the supplied 1½ in.
(3.8 cm) mounting screws and
washers into the wall and/or
wall anchors.
7. Install the bottom support
bracket to the wall centered
Figure 8
Mounting hole
Mounting
holes
Figure 7
2 x 4 Framing
Loading ...
Loading ...
Loading ...