Loading ...
Loading ...
Loading ...
Installing the U-bolt and Handlebar Base
1 Place the U-bolt around the handlebar , and thread the ends through the handlebar base .
2 Tighten the nuts to secure the base.
NOTE: The recommended torque is 50 lbf-in (5.65 N-m). Do not exceed torque of 80 lbf-in (9.04 N-m).
Installing the Handlebar Base to the Clutch-Clamp or Brake-Clamp Brackets
1 Remove the two factory bolts on your clutch-clamp or brake-clamp bracket .
NOTE: Both 1/4 in. standard and M6 bolts are included. Match the size of the factory bolts on your clutch-
clamp or brake-clamp bracket.
2 Thread the new bolts through the handlebar base, spacers , and clutch-clamp or brake-clamp bracket.
3 Tighten the bolts to secure the base.
Installation 5
Loading ...
Loading ...
Loading ...